Weighbridge Software

Weighbridge Software | Axle Weight

Supplier: Ultrahawke

Weighbridge Software | Axle Weight

The Ultrahawke Weighbridge Software | Axle Weight has been designed for use as either a manned or un-manned system.

1122 Recent Views Call for more details

A typical sequence of operations is as follows:

Driver approaches axle weigher and ensures weight display is ZERO
Driver positions Steer on axle weigher
Remote Display will display weight of Steer (1= weight, T = weight)
When weight has been captured Remote Display will display PROCEED
Driver positions Drive on axle weigher
Remote Display will display weight of Steer (2= weight, T = weight)
Driver positions First Tri-axle on axle weigher
Remote Display will display weight of Steer (3= weight, T = weight)
Driver positions Second Tri-axle on axle weigher
Remote Display will display weight of Steer (4= weight, T = weight)

When all the axle groups have been weighed and whilst the last axle is still in position on the axle weigher the driver takes the following action if system is manned by an operator:

Driver exits vehicle and proceeds to PC location
Driver enters vehicle ID
Driver enters any information relating to Customer, Destination and Seal Numbers
Driver clicks the PRINT & SAVE button on the PC screen and collects weighbridge docket
Driver vacates axle weigher

Any weighing transaction that has been Saved or Printed and Saved will be stored on the PC and may be recalled at a later date. Each transaction is given a sequential number and this number is printed on the weighbridge docket.

A variation to the standard program allows for control of the axle weigher software to be taken over by different locations where the software has been installed (Despatch, Main Office, Warehouse etc). This feature provides the customer more flexibility of operations when information from the Axle Weigher is required by different departments within the one organization. A button will be displayed on each screen to TAKE CONTROL. It will be possible to print the weighbridge docket either at the location of the PC that has taken control or where the driver is present.

Prior to the program being used for the first time it will be necessary to put information into the Vehicle, Destination and Operator data bases. This will be done by the operator and not by the supplier of the software. (This is optional as all information can be free entry, but if the driver is given a list to pick from it will be easier for most).

For more information on Ultrahawke weighbridge software, please call or use the enquiry box for a direct reply.

To contact Ultrahawke about Weighbridge Software | Axle Weight use Get a quote.

A typical sequence of operations is as follows:

Driver approaches axle weigher and ensures weight display is ZERO
Driver positions Steer on axle weigher
Remote Display will display weight of Steer (1= weight, T = weight)
When weight has been captured Remote Display will display PROCEED
Driver positions Drive on axle weigher
Remote Display will display weight of Steer (2= weight, T = weight)
Driver positions First Tri-axle on axle weigher
Remote Display will display weight of Steer (3= weight, T = weight)
Driver positions Second Tri-axle on axle weigher
Remote Display will display weight of Steer (4= weight, T = weight)

When all the axle groups have been weighed and whilst the last axle is still in position on the axle weigher the driver takes the following action if system is manned by an operator:

Driver exits vehicle and proceeds to PC location
Driver enters vehicle ID
Driver enters any information relating to Customer, Destination and Seal Numbers
Driver clicks the PRINT & SAVE button on the PC screen and collects weighbridge docket
Driver vacates axle weigher