UPS Status Indicator

UPS Status Indicator | Benbro

Supplier: Benbro Electronics

UPS Status Indicator | Benbro

The Benbro UPS Status Indicator (UPSSI) has been specifically designed to provide remote indication of the UPS Status in a medical environment.

121 Recent Views Call for more details

Features of the Benbro UPS Status Indicator:

Suitable for installation in operating theatres, intensive care, recovery wards, isolation rooms, nursing stations, treatment rooms, and other special care areas.
The equipment is suitable for wall mounting in a standard Australian electrical accessory bracket.
The unit is connected to the UPS electrical supply system and will indicate "Mains on" with a green LED indicator.
The unit will indicate loss of supply to the UPS ("UPS in emergency mode") with a synchronised, pulsating, audible alarm and a Visual flashing red LED alarm indicator, The UPSSI is equipped with an audio mute button (the Audible alarm will continue until muted). The visual alarm (and the audible alarm – if not muted) shall continue until the supply is restored to the UPS or the UPS is exhausted.
The mute function can be configured to "time out" if left unattended for periods of 1hr – 4hrs.
The UPSSI can be provided with an optional relay alarm output voltage free contact (normally open or closed on alarm).
Upon total loss of the mains power, the alarm contacts will be in the "Closed Alarm" state.

Specifications:

Power Supply: 100Vac-240Vac, 55mA/36mA Max, 47-63Hz (From UPS)
Fuse Rating: 400mA 250V Slow Blow (F1). Fuse Must be replace with one of the same rating.
Mains Indicator: Green LED indicates mains on
Alarm Indicator: Flashing Red LED indicates UPS in emergency mode
Audible Alarm: Pulsing buzzer indicates UPS in emergency mode
Mute Function: 1hr-4hrs in 1hr increments
Alarm Input: Voltage free contact – normally closed open on alarm
Alarm Output Option*: Voltage free contact (normally open – closes on alarm)
Alarm Output Contact Rating: 1A 24VDC / 0.5A 125Vac
Input Power Connector: Screw terminals suitable for 2.5mm² wiring
Input Alarm Connector: Screw terminals suitable for 2.5mm² wiring
Alarm Output Connector Option*: Screw terminals suitable for 2.5mm² wiring
Operating Temperature Range: 0-55°C
Dimensions: 116mm x 75mm x 30mm (Standard Australian Electrical accessory plate format)

*Must be specified when ordering – additional cost applies

To contact Benbro Electronics about UPS Status Indicator | Benbro use Get a quote.

Features of the Benbro UPS Status Indicator:

Suitable for installation in operating theatres, intensive care, recovery wards, isolation rooms, nursing stations, treatment rooms, and other special care areas.
The equipment is suitable for wall mounting in a standard Australian electrical accessory bracket.
The unit is connected to the UPS electrical supply system and will indicate "Mains on" with a green LED indicator.
The unit will indicate loss of supply to the UPS ("UPS in emergency mode") with a synchronised, pulsating, audible alarm and a Visual flashing red LED alarm indicator, The UPSSI is equipped with an audio mute button (the Audible alarm will continue until muted). The visual alarm (and the audible alarm – if not muted) shall continue until the supply is restored to the UPS or the UPS is exhausted.
The mute function can be configured to "time out" if left unattended for periods of 1hr – 4hrs.
The UPSSI can be provided with an optional relay alarm output voltage free contact (normally open or closed on alarm).
Upon total loss of the mains power, the alarm contacts will be in the "Closed Alarm" state.

Specifications:

Power Supply: 100Vac-240Vac, 55mA/36mA Max, 47-63Hz (From UPS)
Fuse Rating: 400mA 250V Slow Blow (F1). Fuse Must be replace with one of the same rating.
Mains Indicator: Green LED indicates mains on
Alarm Indicator: Flashing Red LED indicates UPS in emergency mode
Audible Alarm: Pulsing buzzer indicates UPS in emergency mode
Mute Function: 1hr-4hrs in 1hr increments
Alarm Input: Voltage free contact – normally closed open on alarm
Alarm Output Option*: Voltage free contact (normally open – closes on alarm)
Alarm Output Contact Rating: 1A 24VDC / 0.5A 125Vac
Input Power Connector: Screw terminals suitable for 2.5mm² wiring
Input Alarm Connector: Screw terminals suitable for 2.5mm² wiring
Alarm Output Connector Option*: Screw terminals suitable for 2.5mm² wiring
Operating Temperature Range: 0-55°C
Dimensions: 116mm x 75mm x 30mm (Standard Australian Electrical accessory plate format)