Tecnair Stainless Microbore Cylinders | ...
Long Life Cylinder
MS series cylinder end caps are manufactured from AISI 316 Stainless Steel and the barrel is in 304 Stainless Steel.
High Speed – Low Noise
TecnAir microbore cylinders are designed for high speed operation and incorporate nitrile rubber buffer rings in the piston to relieve impact and reduce noise operating levels to 70dB(A).
High Performance Wiper Seal
The wiper seal is produced in a single part moulding using a special polyurethane compound requiring no circlip to retain the seal, improving the clean-line aspects of the cylinder. This unique design provides high frequency operation combined with a high resistance to wear. The material is highly resilliant against corrosion.
Clean Line End Caps
The end caps are machined from solid AISI 316 stainless steel bar to a smooth finish, clean line to eliminate contamination traps. The clean-line barrel is manufactures from AISI 304 stainless steel with polished internal bore for maximum strength.
ATEX Certified
MS cylinders can be ordered with ATEX certification according to directive 94/9/EC
TECHNICAL DATA | |
---|---|
Type | Stainless steel cylinder |
Bore (mm) | 16 / 20 / 25 |
Mounting | ISO 6432 |
Stroke | 1 metre (max) |
Operating Pressure | 1.5 – 10 bar |
Fluid | Filtered 50μ. Use with or without lubrication |
Operating temperature | Max + 80° Min -20° |
Cushions | Mechanical (Adjustable pneumatic cushioning upon request) |
To contact Tecnair about Tecnair Stainless Microbore Cylinders | MS Series use Get a quote.
Long Life Cylinder
MS series cylinder end caps are manufactured from AISI 316 Stainless Steel and the barrel is in 304 Stainless Steel.
High Speed – Low Noise
TecnAir microbore cylinders are designed for high speed operation and incorporate nitrile rubber buffer rings in the piston to relieve impact and reduce noise operating levels to 70dB(A).
High Performance Wiper Seal
The wiper seal is produced in a single part moulding using a special polyurethane compound requiring no circlip to retain the seal, improving the clean-line aspects of the cylinder. This unique design provides high frequency operation combined with a high resistance to wear. The material is highly resilliant against corrosion.
Clean Line End Caps
The end caps are machined from solid AISI 316 stainless steel bar to a smooth finish, clean line to eliminate contamination traps. The clean-line barrel is manufactures from AISI 304 stainless steel with polished internal bore for maximum strength.
ATEX Certified
MS cylinders can be ordered with ATEX certification according to directive 94/9/EC
TECHNICAL DATA | |
---|---|
Type | Stainless steel cylinder |
Bore (mm) | 16 / 20 / 25 |
Mounting | ISO 6432 |
Stroke | 1 metre (max) |
Operating Pressure | 1.5 – 10 bar |
Fluid | Filtered 50μ. Use with or without lubrication |
Operating temperature | Max + 80° Min -20° |
Cushions | Mechanical (Adjustable pneumatic cushioning upon request) |
To contact Tecnair about Tecnair Stainless Microbore Cylinders | MS Series use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product