Tecnair - Digital Pressure Switches

Supplier: Tecnair

Digital Pressure Switches

Tecnair Digital Pressure Switches

In Stock

Adjustable Set Points
Upper and lower pressure points can be set providing colour change LCD display with adjustable hysteresis

Programmable Outputs
Programmable upper and lower outputs provide analogue feedback signal for PLC input

Multi-Colour Display
Colour changes from green to red when pressure goes outside of the pre-set zones, set by the operator

TECHNICAL DATA
Model	DPS-01	DPS-S10
Pressure range	-1 to 1 bar	1 to 10 bar
Measurement range	-100kPa to 100kPa	-0.100MPa to 1.000MPa
Setting range	-100kPa to 100kPa	0.000MPa to 1.000MPa
Pressure resistance	500kPa	1.500MPa
Fluid	Compressed air, Filtered 50μ
Measurement accuracy	≤ ± 2% (full scale) at ambient temperature 25°C
Temperature error	≤ ± 3% (full scale) at ambient temperature 50°C
Thread	External thread R1/8 – Internal thread M5
Pressure display	LCD (two rows – dual colour display)
Status display	4 digit measurement value – output status display
Display mode	4 dimmer options
Voltage	15 to 30 VDC ± 10%
Power consumption	40mA max
Contact rating	100 VA
Transistor output signal	NPN	PNP
Transistor output current	80mA max	80mA max
Transistor output ΔP	≤ 1V	≤ 1V
Analog output signal	Analog voltage output 1 to 5V	Simulation current output 4 to 20mA
Analog load resistance	≤ 1KΩ	≤ 400Ω
Response time	2.5ms – 20ms – 100ms – 500ms – 1000ms – 2000ms (adjustable)
Circuit protection	Short circuit protection included as standard
Protection degree	IP40
Operating temperature	0 to 50°C
Operational humidity	35 to 80% RH (non-condensing)
Vibration resistance	Amplitude 1.5mm – 10HZ to 500HZ (max)

To contact Tecnair about Tecnair Digital Pressure Switches use Get a quote.

Adjustable Set Points
Upper and lower pressure points can be set providing colour change LCD display with adjustable hysteresis

Programmable Outputs
Programmable upper and lower outputs provide analogue feedback signal for PLC input

Multi-Colour Display
Colour changes from green to red when pressure goes outside of the pre-set zones, set by the operator

TECHNICAL DATA
Model	DPS-01	DPS-S10
Pressure range	-1 to 1 bar	1 to 10 bar
Measurement range	-100kPa to 100kPa	-0.100MPa to 1.000MPa
Setting range	-100kPa to 100kPa	0.000MPa to 1.000MPa
Pressure resistance	500kPa	1.500MPa
Fluid	Compressed air, Filtered 50μ
Measurement accuracy	≤ ± 2% (full scale) at ambient temperature 25°C
Temperature error	≤ ± 3% (full scale) at ambient temperature 50°C
Thread	External thread R1/8 – Internal thread M5
Pressure display	LCD (two rows – dual colour display)
Status display	4 digit measurement value – output status display
Display mode	4 dimmer options
Voltage	15 to 30 VDC ± 10%
Power consumption	40mA max
Contact rating	100 VA
Transistor output signal	NPN	PNP
Transistor output current	80mA max	80mA max
Transistor output ΔP	≤ 1V	≤ 1V
Analog output signal	Analog voltage output 1 to 5V	Simulation current output 4 to 20mA
Analog load resistance	≤ 1KΩ	≤ 400Ω
Response time	2.5ms – 20ms – 100ms – 500ms – 1000ms – 2000ms (adjustable)
Circuit protection	Short circuit protection included as standard
Protection degree	IP40
Operating temperature	0 to 50°C
Operational humidity	35 to 80% RH (non-condensing)
Vibration resistance	Amplitude 1.5mm – 10HZ to 500HZ (max)