Reverse Pulse Dust Collectors for sale from Austedan Fabrications

Reverse Pulse Dust Collectors

Supplier: Austedan Fabrications

Reverse Pulse Dust Collectors

All Reverse Pulse Dust Collectors are built with large inbuilt central pre-separation chamber which aids filter life and means dust is distributed into multiply hoppers evenly.

Features:

Fans – Silencer and lagging if required
Filter bags and cages
Tyco – Reverse Pulse Cleaning System
Dust Collectors made in our factory to suit your specific site requirements
3mm to 5mm mild steel fully welded construction c/w abrasive blasting finish prior to final finish in 2 Pack epoxy to our colour “Claret” or your preference
Galvanised access platform on header side of Dust Collector for valve/header maintenance.

Benefits:

We offer conservative air to cloth ratios and fabric selection for maximum capture of pollutants which in turn gives longer bag life, lower running costs and better emissions
Our filter bags have snaptex cuffs which require no tools to replace our filter bag and are accessible from within the plenum above, which means “No Confined Space Work” or permits are needed for filter bag changes. This is also a safer and cleaner operation than dust collectors which have the filter bags changed from within the dirty area
Our systems work under negative pressure where the fan is on the clean side which means no product or waste ever goes through our fan impellors, which in turn will never go out of balance, wear out prematurely or get broken impellors
Our dust collectors never leech dust out of the joins and seals as they are not light gauge sheetmetal bolted together units under positive pressure where as the dust load on the filter bag increases adds additional pressure and vibration on all joins and seals resulting in premature failure of the dust collector at the seams
Our Hopper angles are designed to help prevent against product hang-up and are minimum of 60° UNA
We offer full design, fabrication, installation and after sales service to suit all customers specific requirements.

Applications:

Made to suit customer specific applications covering:
- Location issues
- Nature of dusts
- All waste dust discharge applications catered for.

To contact Austedan Fabrications about Reverse Pulse Dust Collectors use Get a quote.

Features:

Fans – Silencer and lagging if required
Filter bags and cages
Tyco – Reverse Pulse Cleaning System
Dust Collectors made in our factory to suit your specific site requirements
3mm to 5mm mild steel fully welded construction c/w abrasive blasting finish prior to final finish in 2 Pack epoxy to our colour “Claret” or your preference
Galvanised access platform on header side of Dust Collector for valve/header maintenance.

Benefits:

We offer conservative air to cloth ratios and fabric selection for maximum capture of pollutants which in turn gives longer bag life, lower running costs and better emissions
Our filter bags have snaptex cuffs which require no tools to replace our filter bag and are accessible from within the plenum above, which means “No Confined Space Work” or permits are needed for filter bag changes. This is also a safer and cleaner operation than dust collectors which have the filter bags changed from within the dirty area
Our systems work under negative pressure where the fan is on the clean side which means no product or waste ever goes through our fan impellors, which in turn will never go out of balance, wear out prematurely or get broken impellors
Our dust collectors never leech dust out of the joins and seals as they are not light gauge sheetmetal bolted together units under positive pressure where as the dust load on the filter bag increases adds additional pressure and vibration on all joins and seals resulting in premature failure of the dust collector at the seams
Our Hopper angles are designed to help prevent against product hang-up and are minimum of 60° UNA
We offer full design, fabrication, installation and after sales service to suit all customers specific requirements.

Applications: