Compact High Vacuum Dust Collector | HVAC ...
These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation. The tubular filters permit blockage-free dust release. Polluted air enters through an inlet in the main body and is directed upwards through the array of tubular filters.
The larger dust particles drop out into the hopper while the lighter and finer particles continue into the array of filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned.
The tubes blast compressed air into the filters to help release the dust. The cleaned air is then discharged to atmosphere or through discharge ductwork.
Compressed air is ejected through a solenoid valve which travels through the filters. The air causes the dust to fall off the filters and collect in the bin below.
Tubular filters are made from Polyester needle felt 550 g/m2a.
Construction is from 1.6 mm and 3 mm thick Galvanised sheetmetal panels.
The unit is supplied with an electric motor starter with start/stop push buttons automatic electronic timer for filter cleaning.
Applications: pneumatic conveying systems, industrial centrally ducted vacuum systems, suitable for a wide range of applications, available in stainless steel
For more information on the Compact High Vacuum Dust Collector | HVAC please call or email us today.
To contact Nordfab Pty Ltd about Compact High Vacuum Dust Collector | HVAC use Get a quote.
These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation. The tubular filters permit blockage-free dust release. Polluted air enters through an inlet in the main body and is directed upwards through the array of tubular filters.
The larger dust particles drop out into the hopper while the lighter and finer particles continue into the array of filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned.
The tubes blast compressed air into the filters to help release the dust. The cleaned air is then discharged to atmosphere or through discharge ductwork.
Compressed air is ejected through a solenoid valve which travels through the filters. The air causes the dust to fall off the filters and collect in the bin below.
Tubular filters are made from Polyester needle felt 550 g/m2a.
Construction is from 1.6 mm and 3 mm thick Galvanised sheetmetal panels.
The unit is supplied with an electric motor starter with start/stop push buttons automatic electronic timer for filter cleaning.
Applications: pneumatic conveying systems, industrial centrally ducted vacuum systems, suitable for a wide range of applications, available in stainless steel
For more information on the Compact High Vacuum Dust Collector | HVAC please call or email us today.
To contact Nordfab Pty Ltd about Compact High Vacuum Dust Collector | HVAC use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product