ZETEC Eddy Current Instrument | MIZ-80iD

ZETEC - Eddy Current Instrument | MIZ-80iD

Eddy Current Instrument | MIZ-80iD

A revolutionary eddy current data acquisition unit

22 Recent Views In Stock

The MIZ-80iD is an all-in-one integrated eddy current instrument, probe pusher, and control system that has transformed the way eddy current data is obtained.

This break-through in technology allows for highly efficient and cost effective inspections of your steam generator and condenser tubing in nuclear and conventional power plants.

No longer will you have to deal with the complexities that come with deployment, setup, and maintenance, which results in lower costs of operation and the reduction of human exposure to radiation.

A single Ethernet connection from the host computer provides all the control communication to the entire system. And the module can be configured for either left hand or right hand operation.

The MIZ-81iD is a specialized all-in-one configuration for the French market.

BENEFITS

Ground-breaking all-in-one instrument

The MIZ-80iD is an all-in-one eddy current instrument, probe pusher, and controller which reduces setup time from hours to minutes.

Left or right hand operation

The MIZ-80iD can be setup in whichever orientation is more convenient for inspection. It can also be set up in back-to-back configuration.

Top quality data

The integral eddy current instrument improves data quality by eliminating probe extensions and slip-rings.

Modular design for easy transport

The MIZ-80iD design can quickly be separated into three modules, making handling and transportation easy.

Diagnostics built right in

Tracking of motor current and velocity, controller status, wheel pressure, temperature and probe events are monitored by Zetec Acquisition Control software for easy troubleshooting and adjustment.

Easier to use inside and out

The MIZ-80iD is lightweight, easy to connect and configurable for either hand. Its integrated design simplifies setup as well. Cabling connections require one airline, one Ethernet cable, and two AC cables – a reduction compared to other systems.

SPECIFICATIONS

Power	100-240 VAC 50-60 Hz
Operating Temperature	32°F to 113°F (O°C to 45°C)
Storage Temperature	-4°F to 140°F (-2O°C to 60°C)
Eddy Current Instrument Weight	7 lb (3.18 kg)
Eddy Current Instrument Size	13.0” Diameter x 7”W (33.0 x 17.8 cm)
Frequency Range	20 Hz to 1 MHz
Drive	0 – 20 Vpp
Supported Probe Technology	Array Probes, Bobbin Probes, MRPC
Channel Capability	40 Continuous Mode, 512 Multiplex, 640 Super-Multiplex
Gain	23-53 dB in 1 dB steps, variable
Maximum Sample Rate	Continuous (Simultaneous Injection) Mode: 40,000 Hz, Super-Multiplexed and Multiplexed Modes: 20,000 Hz
Take Up Reel Weight	40.2 lb (18.2 kg)
Take Up Reel Size	21”H x 18”L x 11”W (53.3 x 45.7 x 28.0 cm)
Pusher Drive Weight	43.8 lb (19.9 kg)
Pusher Drive Size	18”H x 11”L x 11”W (45 x 28 x 28 cm)
X-Probe Speed	40 inches/second (101 cm/second)
Bobbin Speed	95 inches/second (241 cm/second)
MRPC +Point Speed	2 inches/second (5 cm/second)
Inputs/Outputs	Ethernet 10/100Base T