Water/Oil Separator | LiquiPure LP for sale from MTA Australasia

Water/Oil Separator | LiquiPure LP

Supplier: MTA Australasia

Water/Oil Separator | LiquiPure LP

Oil/Water Separators 1,1 - 35,5 m3/min

In Stock

Condensate contains large quantities of oil and other impurities, which if freely discharged create significant environmental damage. Consequently most countries have implemented strict condensate discharge legislations. Solutions which do not guarantee the required discharge quality lead to the risk of significant fines, whilst traditional treatment solutions present a notable financial burden. LP LiquiPure Oil/Water separators offer a low cost and low maintenance solution with guaranteed separation in accordance with local legislations.

Operation

As condensate flows into the LP Oil/Water separators, the oil is filtered out through 3 stages of separation. Condensate enters the large depressurizing chamber (centrifugal type for LP001÷002), where oil particles are separated from water thanks to the coalescing effect. The second and third stages of separation are carried out by two different oil filter cartridges (LP004÷035) or a unique cartridge combining two different adsorption technologies (LP001÷002). The condensate moves to the second filtration stage where oleophilic polypropilene fibers remove the bigger part of the oil particles. The final stage of filtration is carried out by a large bed of activated carbon, contained in a bag, which adsorbs any residual oil from condensate. The final result is clean condensate suitable to be easily and safely discharged.

Benefits

• Works with any type of condensate drain.
• Can handle and separate any type of oil.
• Test valve and test set included for sampling purposes.
• Simple to install.
• Easy to maintain.
• No condensate settling tank is required (therefore no bacteria build-up).
• Small compact design.

Standard features

• Operating media: Condensate (air, water, oil) non-aggressive.
Suitable for any type of oil. Not suitable for emulsions.
• Housing material: PA6 GF30/Aluminium/Aluminium Transparent
part Acryl (LP 001÷002); + HDPE (LP004÷035).
• Fittings: Steel, anodized (LP 001÷002); brass, brass-zinc plated,
steel (LP004÷035). Sealing: NBR.
• Filters materials: PP (polypropylene), AC (Active Carbon).
• Water quality test kit: standard (LP004÷035).

Operating limits

• Operating temperature: 1,5-65 °C (for T > 45 °C, performance may decrease).
• LP001÷002: max condensate volume per condensate drain single discharge is 0,125 ltr. Minimum settle/resting time between two
consecutive discharges is 30 s.
• LP004÷035: max condensate volume per condensate drain single discharge is 0,250 ltr.