Vennings 4" & 5" Pencil Grain Auger

Vennings - 4" & 5" Pencil Grain Auger

Supplier: Vennings

4" & 5" Pencil Grain Auger

Vennings 4" & 5" Pencil Grain Auger

In Stock

Vennings 4" & 5" Pencil Grain Auger

Illustrated 20' X 4" Auger on standard adjustable height frame with motor and cover fitted

Although very basic, our 4" & 5" augers are fantastic for shifting small volumes of grains and materials. Especially good for hammer mills and grain cleaners. 4" augers capable of 2-3 bags/minute, 5" augers capable of 4-5 bags/minute.

All the augers include belt, pulleys, pulley cover motor mount and bottom support.

1, 1.5, 2 & 3 H/P electric motors are available. 1440 RPM totally enclosed fan cooled, capacitor start and overload protected. The motor is pre-wired with approximately 2 metres of flex.

Auger Size 4"	Recommended Motor Size	Auger Size 5"	Recommended Motor Size
10' X 4"	1 H/P	10' X 5"	1 H/P
15' X 4"	1 H/P	15' X 5"	1 H/P
20' X 4"	1 1/2 H/P	20' X 5"	1 1/2 H/P
25' X 4"	1 1/2 H/P	25' X 5"	2 H/P
30' X 4"	2 H/P	30' X 5"	3 H/P

* Recommended minimum motor size. FOR PEAS AND LUPINS we suggest going to the next sized motor.

MOBILE FRAMES & STANDS

A choice of three different frames are available, they are a fixed stand, a mobile stand and an adjustable frame.

Fixed Stand fixed height frame with hopper and motor fitted. Available for 10' 15' & 20' Augers only
Mobile Stand fixed height frame with wheels hopper and motor fitted. Available for 10' 15' & 20' Augers only
Standard adjustable height frame with wheels and motor fitted. Available for 15' & 20' Augers only

FIXED STAND

The fixed stand is as the name would suggest, set in position with the auger. There is some adjustment in the height, however, for this to be adjusted; it would mean physically adjusting the clamp that holds the auger in place. The frame is an A frame with one support rod, extending to the base of the auger. This is ideal if you do not intend to move the auger on a regular basis. Suitable for 10', 15' & 20' Augers only

MOBILE STAND
The mobile stand is as above, however it has wheels to manoeuvre around the area. The height is not adjustable, excluding the adjustment of the clamp. Ideal if you require to move the auger regularly from a hammer mill to a small silo. Suitable for 10', 15' & 20' Augers only

STANDARD ADJUSTABLE FRAME
This is the most convenient model available. The unit has two 4-008 wheel barrow wheels for moving, (NOT FOR HIGHWAY USE) and a winch and slide to adjust the height of the auger. The height can be further adjusted by moving the frame up or down the auger. Suitable for 15' & 20' Augers only

OTHER OPTIONS

HOPPERS
An option of steel or plastic hoppers are available to attach.

ROUND OUTLET
If you require a telescopic spout to deliver the grain, a round outlet can be added making the attaching of a telescopic spout easier.

TELESCOPIC SPOUT
PVC Telescopic spout available with flexible hose and clamps, Available in 1200mm (4 foot) that extends to approximately 2300mm (7' 8") or 600mm (2 foot) that extends to approximately 1100mm (3' 8")

To contact Vennings about Vennings 4" & 5" Pencil Grain Auger use Get a quote.