Turning Inserts | Chipbreaker VF Get latest price

The  VF chipbreaker has been developed to avoid such situations when machining under these conditions.

Features of Turning Inserts | Chipbreaker VF

• Designed with a high positive rake and helix angle on the cutting edge, the insert tool life increases considerably by minimizing the heat generated during machining.
• Minmizes vibration when machining slender bars.
• Provides excellent surface finish.
• Suitable for cutting steel, mild steel, low carbon steel, stainless steel, and difficult to cut materials.

   
Recommended Cutting Conditions for Turning Inserts | Chipbreaker VF

• Insert: DNMG 150404(431) R-VF
• Material: 0.45% Carbon Steel
• f=0.08 - 0.40mm/rev
  .003 - .016ipr
• d=0.7 – 3.5mm
  .028 - .138inch

To contact TaeguTec Australia about Turning Inserts | Chipbreaker VF use Get a quote.

The  VF chipbreaker has been developed to avoid such situations when machining under these conditions.

Features of Turning Inserts | Chipbreaker VF

• Designed with a high positive rake and helix angle on the cutting edge, the insert tool life increases considerably by minimizing the heat generated during machining.
• Minmizes vibration when machining slender bars.
• Provides excellent surface finish.
• Suitable for cutting steel, mild steel, low carbon steel, stainless steel, and difficult to cut materials.

   
Recommended Cutting Conditions for Turning Inserts | Chipbreaker VF

• Insert: DNMG 150404(431) R-VF
• Material: 0.45% Carbon Steel
• f=0.08 - 0.40mm/rev
  .003 - .016ipr
• d=0.7 – 3.5mm
  .028 - .138inch

Read less...

To contact TaeguTec Australia about Turning Inserts | Chipbreaker VF use Get a quote.