Teledyne | O3 Analyzer UV Absorption | ...
Ranges Min: 0 - 100 ppb Full scale Max: 0 - 10 ppm Full scale (selectable, dual-range supported)
Measurement Units ppb, ppm, μg/m3, mg/m3 (selectable)
Zero Noise < 0.2 ppb (RMS)*
Span Noise < 0.5% of reading (RMS) above 100 ppb
Lower Detectable Limit < 0.4 ppb*
Zero Drift < 1.0 ppb/24 hours
Span Drift < 1% of reading/24 hours
Lag Time < 10 seconds
Rise/Fall Time < 20 seconds to 95%
Linearity 1% of full scale
Precision <0.5% of reading above 100 ppb
Sample Flow Rate 800 cc/min ±10%
IZS Specifications (optional)
Maximum Concentration: 1.0 ppm
Minimum Concentration: 0.050 ppm
Resolution: 0.5 ppb
Repeatability (7 days): 1% of reading
Initial accuracy: ± 5% of target
Power Requirements 100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges 10V, 5V, 1V, 0.1V (selectable)
Recorder Offset ±10%
Included I/O
1 x Ethernet: 10/100Base-T
2 x RS232 (300-115,200 baud)
2 x USB device ports
8 x opto-isolated digital outputs
6 x opto-isolated digital inputs
4 x analog outputs
Optional I/O
1 x USB com port
1 x RS485
8 x analog inputs (0-10V, 12-bit)
4 x digital alarm outputs
Multidrop RS232
3 x 4 - 20mA current outputs
Operating Temperature Range 5 - 40ºC (with EPA Approval)
Dimensions - (HxWxD) 7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight - 28 lbs (12.7 kg) / 30.6 lbs (13.8 kg) with IZS
To contact Thomson Environmental Solutions about Teledyne | O3 Analyzer UV Absorption | Model - T400 use Get a quote.
Ranges Min: 0 - 100 ppb Full scale Max: 0 - 10 ppm Full scale (selectable, dual-range supported)
Measurement Units ppb, ppm, μg/m3, mg/m3 (selectable)
Zero Noise < 0.2 ppb (RMS)*
Span Noise < 0.5% of reading (RMS) above 100 ppb
Lower Detectable Limit < 0.4 ppb*
Zero Drift < 1.0 ppb/24 hours
Span Drift < 1% of reading/24 hours
Lag Time < 10 seconds
Rise/Fall Time < 20 seconds to 95%
Linearity 1% of full scale
Precision <0.5% of reading above 100 ppb
Sample Flow Rate 800 cc/min ±10%
IZS Specifications (optional)
Maximum Concentration: 1.0 ppm
Minimum Concentration: 0.050 ppm
Resolution: 0.5 ppb
Repeatability (7 days): 1% of reading
Initial accuracy: ± 5% of target
Power Requirements 100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges 10V, 5V, 1V, 0.1V (selectable)
Recorder Offset ±10%
Included I/O
1 x Ethernet: 10/100Base-T
2 x RS232 (300-115,200 baud)
2 x USB device ports
8 x opto-isolated digital outputs
6 x opto-isolated digital inputs
4 x analog outputs
Optional I/O
1 x USB com port
1 x RS485
8 x analog inputs (0-10V, 12-bit)
4 x digital alarm outputs
Multidrop RS232
3 x 4 - 20mA current outputs
Operating Temperature Range 5 - 40ºC (with EPA Approval)
Dimensions - (HxWxD) 7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight - 28 lbs (12.7 kg) / 30.6 lbs (13.8 kg) with IZS
To contact Thomson Environmental Solutions about Teledyne | O3 Analyzer UV Absorption | Model - T400 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product