Tectron Conveyor Belt Metal Detector - ...

Tectron - Conveyor Belt Metal Detector - 8050

Conveyor Belt Metal Detector - 8050

The Tectron 8050 Conveyor Metal Detector has the unique ability to detect and discriminate between non-magnetic & magnetic, tramp metals.

39 Recent Views In Stock

The 8050 was originally designed at the request of mines handling magnetic ore that were previously unable to use magnets to remove tramp metal because the magnets also removed their magnetic ore. Unlike a typical Conveyor Metal Detector, the model 8050 is designed to be installed BEFORE the magnet. When magnetic metal is detected, a timed relay is activated which is commonly used to power up a magnet to remove the metal. This allows the magnet to operate at very low power when there is no metal present, and only power up to remove If non-magnetic tramp metal is detected. A separate relay activates which can stop the belt for manual removal.

Additionally the model 8050 has an “oversize” adjustment that stops the belt if a piece of magnetic metal that is too large for the magnet to remove is detected. This is useful for stopping things like wear plates from primary crushers. The model 8050 provides the most comprehensive protection available for customers handling magnetic ore.

RTI engineers design a custom or semi-custom detector that is specifically suited to the customer’s unique installation, requirements. The antennas can be installed on chutes, conveyors or troughs. Our flexibility at the design stage makes the Model 8050 a particularly good choice when retrofitting a unit in an existing installation.

The detector can be set to detect all non-magnetic tramp metals and those pieces of magnetic tramp metal which are too large for, or missed by, the magnet.