SPX FLOW Wall Mount Air Dryer | LHA Series ...

SPX FLOW - Wall Mount Air Dryer | LHA Series

Supplier: SPX FLOW

Wall Mount Air Dryer | LHA Series

The LHA Series Heat–Les™ Desiccant Air Dryer will protect process and pneumatically operated equipment from the potentially harmful effects of moisture that are present in typical compressed air systems.

15 Recent Views In Stock

LHA Series dryers will produce pressure dew points of -40°F and -100°F thereby protecting air systems that are exposed to below freezing temperatures.

Features of this product

Consistent outlet pressure dew points - desiccant beds and cycle time optimized to produce -40°F (-40°C) pressure dew points at standard flow rating [equals an atmospheric dew point of -71°F (-57°C)] or -100°F (-73°C) pressure dew point at reduced flow ratings [equals an atmospheric dew point of -122°F (-86°C)]
Minimum purge air usage - saving the heat of adsorption maximizes the moisture holding capacity of the purge air, minimizing the
amount required
Long desiccant life - beds sized to prevent fluidization, plus slow and complete regeneration, prevent desiccant movement and
deterioration
Heavy duty purge exhaust muffler for quiet operation
Non-lubricated, soft seated control valves
Standard 4 minute cycle
Fully repressurizes the regenerating tower before going on-stream
to prevent bed movement and loss of pressure downstream
Stainless Steel construction for long, corrosion-free life
Easily removed to perform maintenance
Prevents desiccant channeling resulting in extended bed life
Power on light
Tower indicator lights
On-off switch
Moisture indicator to provide visual verification of dryer performance
Piping kit for ease of field installation

To contact SPX FLOW about SPX FLOW Wall Mount Air Dryer | LHA Series use Get a quote.

LHA Series dryers will produce pressure dew points of -40°F and -100°F thereby protecting air systems that are exposed to below freezing temperatures.

Features of this product

Consistent outlet pressure dew points - desiccant beds and cycle time optimized to produce -40°F (-40°C) pressure dew points at standard flow rating [equals an atmospheric dew point of -71°F (-57°C)] or -100°F (-73°C) pressure dew point at reduced flow ratings [equals an atmospheric dew point of -122°F (-86°C)]
Minimum purge air usage - saving the heat of adsorption maximizes the moisture holding capacity of the purge air, minimizing the
amount required
Long desiccant life - beds sized to prevent fluidization, plus slow and complete regeneration, prevent desiccant movement and
deterioration
Heavy duty purge exhaust muffler for quiet operation
Non-lubricated, soft seated control valves
Standard 4 minute cycle
Fully repressurizes the regenerating tower before going on-stream
to prevent bed movement and loss of pressure downstream
Stainless Steel construction for long, corrosion-free life
Easily removed to perform maintenance
Prevents desiccant channeling resulting in extended bed life
Power on light
Tower indicator lights
On-off switch
Moisture indicator to provide visual verification of dryer performance
Piping kit for ease of field installation