Sense IoT Ethernet Gateway

Sense IoT - Ethernet Gateway

Supplier: Sense IoT

Ethernet Gateway

The Sense IoT Ethernet gateway allows your Sense IoT Wireless Sensors to communicate with the Sense IoT Online Wireless Sensor Monitoring and Notification System without the need for a PC.

19 Recent Views In Stock

Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the Sense IoT online system. The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port.

Other Features

AC power supply (POE version also available)
Existing Internet connection required
No PC required for operation
Real time TCP interface
SNMP poll and trap interface
MODBUS TCP interface
FCC, IC and CE certified
Range may vary depending on environment

What's in the box?

Ethernet Gateway
High Gain Antenna
Power Supply
Ethernet Cable
Ethernet Gateway Quick Start Guide

Suggested Application

Transmits sensor data to the Sense IoT online sensor monitoring portal
Commercial monitoring applications
Facilities monitoring
Small business monitoring
Large business monitoring

Ethernet Gateway Specifications

Product Code: MNG2-9+EG-EGW
Dimensions: 139.9mm x 101.8mm x 35mm
Storage Temperature: -20ºC to +85ºC
Enclosure Materials: ABS plastic
LED Lights: H/W Status, Sense IoT Connection Status, Sensor Data Activity
Operating Temperature: -10ºC to +70ºC
Device Memory: 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
Hardware: 10/100 Ethernet Controller
IEEE Standard Compliance: 802.3-2002
Operation: Full and Half Duplex
Cross-over Correction: Automatic MDI/MDI-X
Addressing: Pre-programmed MAC Address
Host Address: t1.sensorsgateway.com
Default Port: 3000
Protocols Supported: UDP, DHCP, TCP, SNMP. Modbus
Cable Connector: CAT 5
Power Supply: 5.5 V AC Adapter | Power-over-ethernet option required standard PoE (802.3AF) Class 1 capable power injector (not included)

433 MHz Specification

Operating Frequency: 433 MHz Operating Frequency
Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

To contact Sense IoT about Sense IoT Ethernet Gateway use Get a quote.