Seal & Shrink Machine | ZinZina for sale from Pack Synergy

Seal & Shrink Machine | ZinZina

Supplier: Pack Synergy

Seal & Shrink Machine | ZinZina

The ZinZina has been designed, developed and manufactured in Australia with a new vision and concept of a Seal and Shrink Machine that provides the capability and reliability to work efficiently and economically with new polyolefin films on the market.

Machine Body

Made of folded and welded sheet metal with 45 degrees front facing panels to ergonomically blend with working hands of the operator. All parts are powder coated, zinc plated and/or stainless steel.

Four side panels create easy access to any of the machines components for easy inspection, servicing or adjustment if required.

ZinZina can be positioned and operated against a wall for space saving with no protruding moving parts.

Sealing – Hood Frame

The sealing frame is constructed by six plates that are doweled and welded together. This provides support and lodgment of the sealing infills, the vertical tensioners and the corner sealing element insulation block.
The opening of the sealing frame is made by mechanical actuator with an extension spring. This creates a balance load without the need of a magnetic device to keep the sealing frame down.

The hood is made of 5 mm clear heat resistance polycarbon with separate side panels.The sealing frame/hood is able to withstand the working temperature and is designed to stay closed during stand by time for energy efficiency and eliminating the need of preheat cycles.

Shrinking Chamber

The shrinking chamber has been designed with periferical air ducts adjacent to the cross and longitudinal sealing area to maximize air flow without the need of film over cutting. This minimises time and energy.
The heater box provides ample volume of space for hot air turbulence generated by a steel fan.

Roll Holder

The roll holder is supported and slides on nylon wheels for maximum load capacity. The neutral film supporting and tracking rollers make film roll change and adjustment easy. Film unwinding roller with perforator wheels are also installed. Provision for a second roll holder is available as an optional extra.

ELECTRICAL EQUIPMENT

The electrical equipment is designed in accordance with international safety standards.
The control panel provides:

Main Switch
Control lamp
Sealing Timer
Shrinking Timer
Temperature Controller
Seal Only Selector Switch

All wires are ‘heavy duty’ and are annotated with reference numbers for easy find of electrical components.
Most importantly, all components are standard for easy replacement.

The ZinZina is ready for positioning, does not need assembly work,It only requires to be connected to your electric supply, interposing a cut-off switch.

STANDARD TECHNICAL DATA

Electrical Components Telemecanique
Voltage 240 volts 12 amps
Heating Elements 2400 kw
Shrinking Fan Motor 0.25 kw 2400rpm
Warm Up Time 7 minutes
Production Output 4/8 Packs per minute
Sealing Area 400 x 500 mm L
Maximum Height of Product (in relation to width) Max 200 mm
Maximum Roll Width 600 mm
Maximum Roll Diameter 220 mm
Loading Table Stainless Steel
Working Height 940 mm
Machine Height (Hood Closed & Open) 1100 / 1350 mm
Machine Length 1300 mm
Machine Width 700 mm
Total Weight 110Kg

The ZinZina is arguably the best seal and shrink machine available in todays marketplace, reliable, efficient and high quality.

For more information or a demonstration please call or use the IndustrySearch Enquiry box for a direct reply.

To contact Pack Synergy about Seal & Shrink Machine | ZinZina use Get a quote.