RKI Instruments - Single Channel Gas Detection Controller | Beacon 110

Single Channel Gas Detection Controller | Beacon 110

The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection.

In Stock

The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. An external reset switch allows the alarm to be silenced from outside of the controller housing.

The Beacon 110 is capable of accepting RKI sensors directly for oxygen, hydrogen sulphide or carbon monoxide. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC) which make it a very handy controller for single channel toxic applications. Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.

The 10 amp rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration.

This case design complies with lock out / tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall mounting kit for easy installation.

Features

Low cost versatile solution
Compact, weatherproof, NEMA 4X enclosure
Accepts RKI LEL/O2/H2S/CO direct connect sensors
115/220 VAC or 24 VDC operation
Long life sensors (2+ years typical)
Accepts any 4-20 mA transmitter
Audible alarm with reset button
Two programmable alarm levels
Built-in trouble alarm with relay
Relay rating 10 amps, form C
Provides 4-20 mA output

Applications

Laboratories
Petrochemical plants
Refineries
Water & wastewater treatment plants
Pulp & paper mills
Manufacturing facilities
HVAC
Gas, telephone, & electric utilities
Steel

To contact Control Equipment about RKI Instruments Single Channel Gas Detection Controller | Beacon 110 use Get a quote.

The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. An external reset switch allows the alarm to be silenced from outside of the controller housing.

The 10 amp rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration.

Features