Press Brake Clamping System | Wilson Tool ...
Maximize Your Press Brake Flexibility
The Express Air Clamping System offers fast, flexible setups using a clean, low-cost power source. Designed for European style press brake tooling, Express Air is a pneumatic punch holder that uses standard shop air (90-120 Psi) to clamp and seat tooling in seconds with the touch of a button or the flip of a switch. There is no need for an additional pump or power source.
With a unique interlocking wedge design Express Air sectionalized punch holders can be pushed together to create a solid beam or gapped for box bending. They also boast the narrowest body on the market to enable the greatest range of bend angles — up to 30°with longer flanges in the front and back than similar holders.
Smaller Investment. Big Impact.
Additionally, if you have an older press brake that has a scratched, dinged or uneven bending surface, adding a clamping solution like the Express Air™ system will breathe new life into your machine. Not only will you get a smooth, harder work surface, you’ll boost productivity with a variety of timesaving features at a significantly lower cost than regrinding or replacing the beam.
Easy Installation
The clamping system is also fast and easy to install for minimal machine downtime. Additionally, the clamps are interchangeable with most OEM holders for a gradual transition to air power using several holders or all at once with holders for the entire length of the beam.
Data below is metric only
Tool Style |
European |
Seating |
Beveled tangs self seat |
Shortest Piece to Clamp |
10mm |
Hardness |
70 HRC |
Tool Shoulder Load (Symmetric) |
104 tons/m |
Tool Weight Limit to Clamp & Seat |
288 kg |
CLAMPING INFORMATION |
|
Method to Secure to the Press Brake |
American, Z1, Z2 |
Power, Method, Actuation |
Pneumatic, piston, wireless or handle |
Beam Construction |
Modular |
Working Height |
American and Z1 = 100mm; Z2 = 120mm |
Operating Pressure |
6.2-8.3 Bar |
Clears 30° Acute Front and Back |
Front and Back |
This Product is available for distribution in Australia only
If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.
To contact Sheetmetal Tooling Tech about Press Brake Clamping System | Wilson Tool Express Air use Get a quote.
Maximize Your Press Brake Flexibility
The Express Air Clamping System offers fast, flexible setups using a clean, low-cost power source. Designed for European style press brake tooling, Express Air is a pneumatic punch holder that uses standard shop air (90-120 Psi) to clamp and seat tooling in seconds with the touch of a button or the flip of a switch. There is no need for an additional pump or power source.
With a unique interlocking wedge design Express Air sectionalized punch holders can be pushed together to create a solid beam or gapped for box bending. They also boast the narrowest body on the market to enable the greatest range of bend angles — up to 30°with longer flanges in the front and back than similar holders.
Smaller Investment. Big Impact.
Additionally, if you have an older press brake that has a scratched, dinged or uneven bending surface, adding a clamping solution like the Express Air™ system will breathe new life into your machine. Not only will you get a smooth, harder work surface, you’ll boost productivity with a variety of timesaving features at a significantly lower cost than regrinding or replacing the beam.
Easy Installation
The clamping system is also fast and easy to install for minimal machine downtime. Additionally, the clamps are interchangeable with most OEM holders for a gradual transition to air power using several holders or all at once with holders for the entire length of the beam.
Data below is metric only
Tool Style |
European |
Seating |
Beveled tangs self seat |
Shortest Piece to Clamp |
10mm |
Hardness |
70 HRC |
Tool Shoulder Load (Symmetric) |
104 tons/m |
Tool Weight Limit to Clamp & Seat |
288 kg |
CLAMPING INFORMATION |
|
Method to Secure to the Press Brake |
American, Z1, Z2 |
Power, Method, Actuation |
Pneumatic, piston, wireless or handle |
Beam Construction |
Modular |
Working Height |
American and Z1 = 100mm; Z2 = 120mm |
Operating Pressure |
6.2-8.3 Bar |
Clears 30° Acute Front and Back |
Front and Back |
This Product is available for distribution in Australia only
If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.
To contact Sheetmetal Tooling Tech about Press Brake Clamping System | Wilson Tool Express Air use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product