Onsite Detention Tanks by Sydney Water ...
As part of The Martins Group, Sydney Water Tank (SWT) Onsite Detention Tanks manufacture onsite detention (OSD) tanks and detention control pits (DCP). All OSD tanks and DCPs are produced on an individual basis according to your specific requirements.
OSD tanks control the flow of stormwater from the roof to the local stormwater system. Buildings with large roof surface areas capture a large volume of rainwater that may overwhelm the local stormwater drainage system if allowed to flow freely. OSD tanks detain the water and provide a controlled release to prevent stormwater surges.
Many council approvals for large buildings require the installation of OSD or DCP systems. However, they can only be designed by a suitably qualified hydraulic engineer. Often it is left to the plumber to interpret the engineer’s design and build an OSD system from stormwater components such as pits and water tanks. To do this on site can be tedious and often not cost effective.
SWT Onsite Detention Tanks will take your hydraulic drawings and construct a stormwater management system to suit your engineer’s design. The system can include an OSD tank and DCP complete with orifice plates, trash screens and with inlets and overflows in the correct position. Sometimes the OSD can be combined with the rainwater reuse tank to save cost. The delivery truck will crane the tank(s) and DCP into position. Once on site, the system is ready to connect immediately. SWT Onsite Detention Tanks provides clear installation drawings to ensure your stormwater system is installed properly.
Save time and money by having the tank and pits arrive on site with:
Site preparation consists of ensuring the site is excavated to the levels shown on the drawing ready to lift the tanks into position from SWT Onsite Detention Tank crane truck.
To contact Sydney Water Tanks about Onsite Detention Tanks by Sydney Water Tanks use Get a quote.
As part of The Martins Group, Sydney Water Tank (SWT) Onsite Detention Tanks manufacture onsite detention (OSD) tanks and detention control pits (DCP). All OSD tanks and DCPs are produced on an individual basis according to your specific requirements.
OSD tanks control the flow of stormwater from the roof to the local stormwater system. Buildings with large roof surface areas capture a large volume of rainwater that may overwhelm the local stormwater drainage system if allowed to flow freely. OSD tanks detain the water and provide a controlled release to prevent stormwater surges.
Many council approvals for large buildings require the installation of OSD or DCP systems. However, they can only be designed by a suitably qualified hydraulic engineer. Often it is left to the plumber to interpret the engineer’s design and build an OSD system from stormwater components such as pits and water tanks. To do this on site can be tedious and often not cost effective.
SWT Onsite Detention Tanks will take your hydraulic drawings and construct a stormwater management system to suit your engineer’s design. The system can include an OSD tank and DCP complete with orifice plates, trash screens and with inlets and overflows in the correct position. Sometimes the OSD can be combined with the rainwater reuse tank to save cost. The delivery truck will crane the tank(s) and DCP into position. Once on site, the system is ready to connect immediately. SWT Onsite Detention Tanks provides clear installation drawings to ensure your stormwater system is installed properly.
Save time and money by having the tank and pits arrive on site with:
Site preparation consists of ensuring the site is excavated to the levels shown on the drawing ready to lift the tanks into position from SWT Onsite Detention Tank crane truck.
To contact Sydney Water Tanks about Onsite Detention Tanks by Sydney Water Tanks use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product