Novaflex - Ceramic Tile Adhesive | Novaflex One Part Get latest price

Benefits

• NovaFlex can be used for internal and external
  wall and floor applications
• NovaFlex can be applied over most acrylic
  based waterproofing membranes, Contact the
  manufacturer prior to commencing application.

Application

• Once the substrate has been appropriately prepared in accordance with the
  above instructions then apply the adhesive onto the surface.
• For floor tiles up to 330 x 330 in size, a 10mm trowel should be used, For
  larger tiles a 12mm trowel should be used.
• A 6mm trowel should be used when tiling Mosaics on the floor.
• For wall tiles up to 200 x 250 in size, a 6mm trowel should be used, for
  larger tiles an 8mm to 10mm trowel should be used
• Do not apply more than 1m2 of NovaFlex at a time, applying rates greater
  than this could result in adhesive skinning over
• To ensure no voids occur and full coverage of adhesive is achieved, press
  tile into adhesive giving a twisting and front and back sliding motion.
• For tiles with uneven or lugs on the rear, it may be required to butter the
  rear of the tile in addition to applying adhesive on the substrate.
• Adhesive bed thickness should be at least 2 to 3mm.
• Commence grouting after 6-8hrs when tile work is firm (refer to grout data
  sheet for correct applications).

To contact FireCrunch Australasia about Novaflex Ceramic Tile Adhesive | Novaflex One Part use Get a quote.

Benefits

• NovaFlex can be used for internal and external
  wall and floor applications
• NovaFlex can be applied over most acrylic
  based waterproofing membranes, Contact the
  manufacturer prior to commencing application.

Application

• Once the substrate has been appropriately prepared in accordance with the
  above instructions then apply the adhesive onto the surface.
• For floor tiles up to 330 x 330 in size, a 10mm trowel should be used, For
  larger tiles a 12mm trowel should be used.
• A 6mm trowel should be used when tiling Mosaics on the floor.
• For wall tiles up to 200 x 250 in size, a 6mm trowel should be used, for
  larger tiles an 8mm to 10mm trowel should be used
• Do not apply more than 1m2 of NovaFlex at a time, applying rates greater
  than this could result in adhesive skinning over
• To ensure no voids occur and full coverage of adhesive is achieved, press
  tile into adhesive giving a twisting and front and back sliding motion.
• For tiles with uneven or lugs on the rear, it may be required to butter the
  rear of the tile in addition to applying adhesive on the substrate.
• Adhesive bed thickness should be at least 2 to 3mm.
• Commence grouting after 6-8hrs when tile work is firm (refer to grout data
  sheet for correct applications).

Read less...

To contact FireCrunch Australasia about Novaflex Ceramic Tile Adhesive | Novaflex One Part use Get a quote.