The WTS Twin Shaft Paddle Mixer is a Batch Mixer with two parallel drums each with counter-rotating shafts that are equipped with paddles fixed at a pre-determined angle.
Description
Documents
120 Recent ViewsIn Stock
The paddles of the WTS Twin Shaft Batch Mixer, with the added efficiency of counter rotation of the overlapping paddles, promote a homogeneous mix independent of particle size and density of the ingredients. The design gives gentle low shear forces but allows a rapid mix with low energy consumption. The mixer can be started under full load. WTS Twin Shaft Batch Mixers are used with dry bulk solids (powders, granules, short fibres), dry bulk solids + liquids (moistening, granulating, coating), as well as liquids + low-viscosity pastes.
Product Features:
Range: 120 to 3,600 litres (4.2 to 127 cu. ft.)
Drives: from 3.0 kW to 60 kW (4 to 82 HP)
Capacity: 2 to 30 batches per hour (depending on recipe and configuration of the unit)
Maximum homogeneity of the mixture
Short mixing time
Gentle product treatment
Quick discharge without segregation
Hardly any material residue inside the mixer
To contact Mechanical Equipment Group about Inquip Paddle Batch Mixer | MAP Batch-Type Twin Shaft | WTS use Get a quote.
The paddles of the WTS Twin Shaft Batch Mixer, with the added efficiency of counter rotation of the overlapping paddles, promote a homogeneous mix independent of particle size and density of the ingredients. The design gives gentle low shear forces but allows a rapid mix with low energy consumption. The mixer can be started under full load. WTS Twin Shaft Batch Mixers are used with dry bulk solids (powders, granules, short fibres), dry bulk solids + liquids (moistening, granulating, coating), as well as liquids + low-viscosity pastes.
Product Features:
Range: 120 to 3,600 litres (4.2 to 127 cu. ft.)
Drives: from 3.0 kW to 60 kW (4 to 82 HP)
Capacity: 2 to 30 batches per hour (depending on recipe and configuration of the unit)