Innovec Controls Single Head Filling System ...
The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
The filling system comprises the following control components:
PVC nozzle assembly comprises:
Specifications
The pump and flow meter are chosen to suit the application
The following additional information is usually required to properly engineer the application.
With this portable system it can be wheeled (or pushed) next to the tank where the filling is to be done. The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
The operator can configure the system for a 5 gallon fill, hold the nozzle over the container to be filled and press the start button. Liquid will flow and when five gallons has been pumped the system will automatically shut off. The operator can then move onto the next container to be filled. Please note: If during a 5 gallon fill the operator has put 3 gallons into a container and needs to stop the filling process temporarily, then that can be achieved by pressing the stop button. The operator can then continue by pressing the start button and put the remaining 2 gallons into the container.
To contact Innovec Controls about Innovec Controls Single Head Filling System use Get a quote.
The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
The filling system comprises the following control components:
PVC nozzle assembly comprises:
Specifications
The pump and flow meter are chosen to suit the application
The following additional information is usually required to properly engineer the application.
With this portable system it can be wheeled (or pushed) next to the tank where the filling is to be done. The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
The operator can configure the system for a 5 gallon fill, hold the nozzle over the container to be filled and press the start button. Liquid will flow and when five gallons has been pumped the system will automatically shut off. The operator can then move onto the next container to be filled. Please note: If during a 5 gallon fill the operator has put 3 gallons into a container and needs to stop the filling process temporarily, then that can be achieved by pressing the stop button. The operator can then continue by pressing the start button and put the remaining 2 gallons into the container.
To contact Innovec Controls about Innovec Controls Single Head Filling System use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product