Innovec | Batch Controller | IBL Get latest price

Read more...

To contact Innovec Controls about Innovec | Batch Controller | IBL use Get a quote.

The instrument can be configured from the front touch buttons to batch volumes from 0.001 to 999,999 litres, and K factors from 999,999 to 0.01 can be utilised. The instrument can batch in up or down mode and provide the excitation power supply for the flow sensor.

Features

• Batch in local or remote mode up or down from set point
• Simple touch switch programming with English statement prompts
• Low cost - High performance
• LCD display of 6 characters with 18mm digit height and white LED backlight
• Low flow alarm with batch cancel
• Programmable end of batch signal with an end of batch pulse of 0.0 to 99.9 seconds
• Background total
• Programmable delay on relay two start and pre-stop
• Batch set from front panel in programme mode or in run
• Pulse output per litre
• Automatic over run compensation in whole litres only
• DIP switch selectable input: turbine, reed switch, open collector, Namur & CMOS logic
• Sensor supply that can be adjusted from 8 to 20VDC
• Plug-in screw terminal electrical connections
• K factor 999,999 to .01 and set point 0.001 to 999,999
• 85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40VDC isolated supply

Specification

Input Details

• The instrument accepts quadrature input with reverse flow detection or single pulse train input from 0 to 2KHZ and is dip switch selectable for open collector, reed, Hall, Namur and turbine signals (from 20mV peak to peak).

Display

• The IBL incorporates a six (6) digit 18mm digit height (LCD) display with integrated white LED backlight with a wide viewing angle and a viewing distance of 5 metres. The front panel switched are an embossed membrane type with positive action.

Printer Interface

• The instrument incorporates an optional RS232 serial port to drive a ticket printer with client header, batch total, accumulated total, current time, current date and batch number.

Totalisor Memory

• The instrument incorporates a background running total that is stored in eeprom memory during loss of power. This total can be displayed by the front total touch button and reset.

Low Flow Alarm

• The instrument incorporates a low flow alarm. If no input pulses are received in a pre- programmed period the low flow output becomes active and the batch is cancelled and LF ERR is displayed.

Environmental Parameters

• 0-70 degrees Celsius and 0-90% RH non-condensing.
• Front facia is weatherproof to IP65.

Power Supply

• 85 to 265VAC 47-63 Hz or DC to DC converter isolator from 12 to 40VDC. An adjustable transducer power supply of 8 to 24VDC at 30mA is incorporated in the instrument.

Mounting Details

• Panel mounting extruded aluminium enclosure of 144 mm wide by 72 mm high by 130mm deep (including pluggable rear terminals) with a panel cut out of 139 mm wide by 67 mm high.
• Explosion proof version available

Approvals

• CE for EMC compliance and electrical safety.

Ordering Information

• Model/input/display/power supply/options.
• Sample number ITS/INC/0-99999.9/24VDC.

Read less...

To contact Innovec Controls about Innovec | Batch Controller | IBL use Get a quote.