Infinity Pipe Systems Aluminium Air Piping ...

Infinity Pipe Systems - Aluminium Air Piping Systems 20mm – 110mm

Supplier: Pneumatics Direct Australia

Aluminium Air Piping Systems 20mm – 110mm

Aluminium Air Pipe – High performance aluminium piping system that is especially designed for air, indicated with blue colour, as per Australian standards.

10 Recent Views In Stock

The non–corrosive extruded aluminium provides structural strength and delivers contaminate-free fluid in a leak free piping system.

The smooth bore of Infinity piping prevents high pressure losses and allows for higher flow rates and performance than that of other systems.

High Flow Range – Specifically designed for long ring main installations in large factories, the high flow series feature a cast aluminium construction, offering the same benefits as the smaller range: easy push-fit installation, minimal leakage and laminar fluid flow. Available in 63mm-110mm diameters.

Architectural grade seamless aluminium pipe, approved for pressures up to 15 bar
Blue colouring for compressed air piping as per Australian standards
Light-weight tubing
Internal and external corrosion free coating
Complies with Australian and European safety standards
Includes High Flow Series (63mm – 110mm) for long ring main installations in large factories

Code	Description	Max Flow Rate (cfm) (25m, @7bar)
900006 20	Aluminium Pipe 20mm x 6m	62
900006 25	Aluminium Pipe 25mm x 6m	124
900006 32	Aluminium Pipe 32mm x 6m	247
900006 40	Aluminium Pipe 40mm x 6m	424
900006 50	Aluminium Pipe 50mm x 6m	742
900006 63	Aluminium Pipe 63mm x 6m	1554
900006 80	Aluminium Pipe 80mm X 6m	2931
900006 110	Aluminium Pipe 110mm X 6m	3531

Technical Information

Max Pressure	15 Bar
Working Temperature Range	-20 °C to 80 °C (Fire tested in accordance with UNI EN 13501-1:2005)
Uv Effect	NONE
Extruded Aluminium	UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2
Chemical Composition	Si: 0.3 ÷ 0.6 - Mg: 0.35 ÷ 0.6 - Fe: 0.10 ÷ 0.30
Designations Uni En 573 - 3	EN AW 6060
Heat Treatment / Melting Point	DRAINED “16” / 600°C
Surface Treatment	Electrostatic painting
Specific Weight / Resistance	2.70 Kg/dm³/ 3.25 μΩ cm
Thermal Conductivity	1.75 W/(cm °K)
Expansion Coefficient	0.024mm/(m °C)
Specific Heat At 100°C	0.92 J/(g °K)
Bearing Tensile Stress	205 N/mm²
Coefficient Of Elasticity	66000 N/mm²
Proportionality Deviation Load	165 N/mm²
Brinel Hardness	60 ÷ 70 HB
Chemical Treatment	Fluorine-Zirconium - prevents corrosion from acid condensing water & sticks like a film on the internal surface of the tube.
External Coating / Internal Coating	Epoxypolyester Powder / Chemically treated with fluorine-zirconium.
Quality Features	UV resistant and fire tested in accordance with UNI EN 13501-1:2005

To contact Pneumatics Direct Australia about Infinity Pipe Systems Aluminium Air Piping Systems 20mm – 110mm use Get a quote.

The non–corrosive extruded aluminium provides structural strength and delivers contaminate-free fluid in a leak free piping system.

The smooth bore of Infinity piping prevents high pressure losses and allows for higher flow rates and performance than that of other systems.

Architectural grade seamless aluminium pipe, approved for pressures up to 15 bar
Blue colouring for compressed air piping as per Australian standards
Light-weight tubing
Internal and external corrosion free coating
Complies with Australian and European safety standards
Includes High Flow Series (63mm – 110mm) for long ring main installations in large factories

Code	Description	Max Flow Rate (cfm) (25m, @7bar)
900006 20	Aluminium Pipe 20mm x 6m	62
900006 25	Aluminium Pipe 25mm x 6m	124
900006 32	Aluminium Pipe 32mm x 6m	247
900006 40	Aluminium Pipe 40mm x 6m	424
900006 50	Aluminium Pipe 50mm x 6m	742
900006 63	Aluminium Pipe 63mm x 6m	1554
900006 80	Aluminium Pipe 80mm X 6m	2931
900006 110	Aluminium Pipe 110mm X 6m	3531

Technical Information

Max Pressure	15 Bar
Working Temperature Range	-20 °C to 80 °C (Fire tested in accordance with UNI EN 13501-1:2005)
Uv Effect	NONE
Extruded Aluminium	UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2
Chemical Composition	Si: 0.3 ÷ 0.6 - Mg: 0.35 ÷ 0.6 - Fe: 0.10 ÷ 0.30
Designations Uni En 573 - 3	EN AW 6060
Heat Treatment / Melting Point	DRAINED “16” / 600°C
Surface Treatment	Electrostatic painting
Specific Weight / Resistance	2.70 Kg/dm³/ 3.25 μΩ cm
Thermal Conductivity	1.75 W/(cm °K)
Expansion Coefficient	0.024mm/(m °C)
Specific Heat At 100°C	0.92 J/(g °K)
Bearing Tensile Stress	205 N/mm²
Coefficient Of Elasticity	66000 N/mm²
Proportionality Deviation Load	165 N/mm²
Brinel Hardness	60 ÷ 70 HB
Chemical Treatment	Fluorine-Zirconium - prevents corrosion from acid condensing water & sticks like a film on the internal surface of the tube.
External Coating / Internal Coating	Epoxypolyester Powder / Chemically treated with fluorine-zirconium.
Quality Features	UV resistant and fire tested in accordance with UNI EN 13501-1:2005