If you are looking to splice or join a hi temp conveyor belt such as Nitrile or EPDM belts, SUPER SCREW TR will handle up to 200 deg C heat.
Description
The SUPER SCREW flexible lacing range is unique and is used on steel-cord belt, solid woven PVC belt, and EP belts. SUPER-SCREW allows customers to join a new belt to an old one and can be used to repair longitudinal tearing, or as a patch on holes. SUPER-SCREW is supplied in different qualities:
Abrasion resistant
Heat resistant or heat retardant
FRAS, MSHA
Oil resistant
SUPER-SCREW can be installed under any weather conditions and is leak proof and flexible (torsion in every direction). The range is used in underground or open cast coal mines, in iron ore and bauxite mines, as well as in steel plants worldwide.
No pre-drilling or special, costly, heavy tools are required. Only a battery or air operated screw driver is needed. 1m of belt width can be safely installed within one hour using a simple splice and tools that are easy to carry to the splice site.
The belt is cut in bias for a smooth splice transition on rollers and scrappers. It is easy to skive the belt with the help of our skiving tool. When SUPER-SCREW is screwed in place, simply perform a last check that all screws are well tightened and the belt is ready to run.
Gone are the days of hot vulcanising, failing splice materials and covers lifting after the splice, simply use the super screw as a permanent splice.
We supply worldwide as a cheaper and better join on Hi temp Nitrile and EPDM belts. Join the growing trend and save thousands of dollars on each splice.
To contact WA Belting Solutions about Hi-temp conveyor belt splice use Get a quote.
The SUPER SCREW flexible lacing range is unique and is used on steel-cord belt, solid woven PVC belt, and EP belts. SUPER-SCREW allows customers to join a new belt to an old one and can be used to repair longitudinal tearing, or as a patch on holes. SUPER-SCREW is supplied in different qualities:
Abrasion resistant
Heat resistant or heat retardant
FRAS, MSHA
Oil resistant
SUPER-SCREW can be installed under any weather conditions and is leak proof and flexible (torsion in every direction). The range is used in underground or open cast coal mines, in iron ore and bauxite mines, as well as in steel plants worldwide.
No pre-drilling or special, costly, heavy tools are required. Only a battery or air operated screw driver is needed. 1m of belt width can be safely installed within one hour using a simple splice and tools that are easy to carry to the splice site.
The belt is cut in bias for a smooth splice transition on rollers and scrappers. It is easy to skive the belt with the help of our skiving tool. When SUPER-SCREW is screwed in place, simply perform a last check that all screws are well tightened and the belt is ready to run.
Gone are the days of hot vulcanising, failing splice materials and covers lifting after the splice, simply use the super screw as a permanent splice.
We supply worldwide as a cheaper and better join on Hi temp Nitrile and EPDM belts. Join the growing trend and save thousands of dollars on each splice.