Gulmen Engineering Digital Laser Label ...

Gulmen Engineering - Digital Laser Label Die-Cutter Any-CUT I

Supplier: Gulmen Digital

Digital Laser Label Die-Cutter Any-CUT I

This laser die-cut is a post processing equipment designed for small batches of printed labels.

Video for Gulmen Engineering Digital Laser Label Die-Cutter Any-CUT I

In Stock

This laser die-cut is a post processing equipment designed for small batches of printed labels. Controlled by desktop PC labels are cut using laser, making its job faster than knife cutting and reducing the costs as the replacement of knife edges are not necessary. The location of the label is not a limitation when it is cut by laser, so waste of media can be minimised.

Anycut can also laminate, coat, slit and remove scrap paper so neat finished rolls are made at the output winder(s).

Digital laser label die-cutter Any-CUT I

Advantages of Anycut-I also include the capacity to cut not only rectangles, rounds or ovals but also complex shapes, of printed or blank labels. Different types of medias can be supported as the laser can be set controlling its intensity and speed. The laser beam method of Anycut-I is so flexible and simple that any existing cut path can be cut out, with no special tooling need. The laser beam simply follows the cut path of any label artwork previously created in ADOBE ILLUSTRATOR CS or similar software.
The quality of the labels is guaranteed by the combination of the latest laser technology and vision system, minimizing errors during the cutting process. Anycut-I can simultaneously laminate and remove scrap paper, reducing time and costs. Laminating films can increase the durability and level of luster of labels.

When labels are cut out barcodes, numbering, QR codes, full and half cuts, sheet die cutting, date and time can be directly marked on the labels through an exclusive software program. In one hour Anycut-I can cut 5.000 labels, is easy to operate and it can be installed in a small space.
No costs on consumables and the product can be used daily 3 hours for 10 years. Combining the advantages of Any-002 and Anycut make label printing system easier and efficient.

Specifications

Maximum web width: 215 mm
Maximum web speed: 18 m/min
Maximum roll diameter: 300 mm
Cutting area: width 200 mm x 1200 mm
Laser source: (10.57 – 10.63 um) CO2
Size: D1620 x W630 x H503 mm
Weight: 190 Kg
Power Supply: 11- 220v

What is laser cutting?

Laser cutting system is contactless type cutting system using laser beam. Unlike other light, due to low scattering rate and high linearity, laser can concentrate large energy on small area. This concentrated energy is adjusted to desired location and cuts label media.

How much is laser cutting faster compared to analogue equipment?

It is 20 times faster than contact type analogue cutter. Difference of speed is even larger when cutting label with complicated shape.

Do you guarantee quality consistency when cutting the label?

One of benefits of laser cutting is to get equally high quality of output from repeated works. When using knife, abrasion of knife changes quality of cutting, but laser guarantees consistency of power for 10,000 hours, which lead to equal quality for label.
In addition, Any-cut provide even more accurate cutting by calibrating cutting location via vacuum pad, sensor, and vision system that minimize moving of paper.

What are necessary peripherals for Any-cut?

Any-cut requires fume extractor to eliminate smoke during cutting and air compressor to remove dust resided on paper. It is important to have right peripherals for work environment in order to maintain Any-cut in the best condition. Therefore, it is highly recommended to purchase genuine products from us in your local area.

What types of media does Any-cut support?

Any-cut supports various types of papers including papers which can be used in Any-001 (Art paper, PP, and PET).
However, papers containing metal element cannot be used in Any-cut.

What functions does dedicated SW provide?

Dedicated SW is provided as plug-in for Illustrator. It provides various cutting, marking and hatching functions. For instance, you can mark bar-code, QR code and serial number on label.

It supports half cutting and complete cutting at the same time. How does it work?

You can set up different cutting conditions for each layer using Any-cut SW.
It enables various cutting operation by adjusting strength and speed of laser.

What is supported cutting size?

It can cut up to 200mm*1200mm size.

What is width of roll which can be mounted in Any-cut?

Up to 215mm wide roll can be mounted.

What is maximum cutting speed of Any-cut?

Max cutting speed is 18m/m. It is recommended that you measure speed in hand by cutting samples as the result may vary depending on a type of paper, and shape of label.

What is lifespan of laser?

We guarantee 10,000 hours of lifespan for laser which means it can be used for 7 years by 6 hour operation per day.

What is maximum diameter and weight of roll which can be mounted?

Max diameter of roll is supported up to 30cm; up to 10 kg of roll can be mounted.

What are consumables for Any-cut?

Brush to remove dust is only a consumable required for Any-cut. It might be good to have cleaning tissue to clean lenses

What is duration for user training?

Two days for user training and three days for reseller training.

What other jobs can Any-cut do apart from cutting?

Apart from laser cutting, Any-cut can do laminating and removing scrap paper at the same time, delivering the best result for user.

Isn’t laser dangerous?

Any-cut is designed for high standard of user safety and stop working when user is exposed to hazard of laser beam. It means Any-cut is 100% safe for you and your co-workers.

How big should work space be?

Any-cut is 1620mm(L)*630mm(W)*503mm(H) big and the first laser cutter which can be used by using desktop PC in small office.

To contact Gulmen Digital about Gulmen Engineering Digital Laser Label Die-Cutter Any-CUT I use Get a quote.