Flux Electronic Flow Control Switch for sale from Gold Coast Sprinkler And Pumping Centre

In Stock

Electronic flow control switch suitably designed to control the running and stopping of booster pumps with inlet pressure.

Flux is a device which starts/stops the pump as demand requires. The pump is started when a tap is turned on to generate a flow and is stopped when the tap is closed generating no flow.

Product Features

Can be installed on any point of the line either vertically or horizontally
Ease of use and monitoring through status LEDS and stop/reset button
Fitted with an inbuilt pressure gauge
Tropicalised circuit board assures complete protection against moisture
Systems protection against dry running and excessively frequent starts

Specifications

Voltage: 230 Volt a.c.
Frequency: 50 Hz
Max Current: 16 Amp
IP Protection: IP 65
Working temperature: 0 – 65 °C
Connections: 1" BSP female 3 piece union
Working/bursting pressure: 10 Bar
Max Flow Rate: 200 l/min
Weight: 970 g
AS4020 Approved
Applications:
Tank stand boosting
Roof tank boosting
Main pressure boosting

Models

FL16

To contact Gold Coast Sprinkler And Pumping Centre about Flux Electronic Flow Control Switch use Get a quote.

Electronic flow control switch suitably designed to control the running and stopping of booster pumps with inlet pressure.

Flux is a device which starts/stops the pump as demand requires. The pump is started when a tap is turned on to generate a flow and is stopped when the tap is closed generating no flow.

Product Features