EOS P 810 - 3D Printer Laser Sintering ...
With a building volume of 700 x 380 x 380 mm, EOS P 810 enables a fast and cost efficient production of plastic parts directly from CAD data. Parts made out of HT-23 material offer high strength at low weight and withstand high temperatures.
Efficiency
Thanks to improved recoating speed, fast digital scanners and high-power lasers the building time is significantly reduced and thus productivity increased.
Quality
HT-23 a Polyether ketone ketone (PEKK) material with encapsulated carbon fiber reinforcement is inherently flame retardant, UV resistant and meets regulations of the aerospace (FAR 25.853) and mobility industry (EN 45545).
Sustainability
With a low refresh rate (60% recyclable, little excess powder) HT-23 is contributing to substantially reduce cost-per-part.
EOS P 810 |
|
Building volume |
700 mm x 380 mm x 380 mm (27.6 x 15 x 15 in) |
Laser type | CO2, 2 x 70 W |
Building rate |
up to 10 mm/h (0.4 in/h); up to 2,7l/h |
Layer thickness: ALM HT-23 |
120 μm (Other thicknesses technically possible) |
Precision optics |
F-theta lenses, high-speed scanners |
Scan speed during building process |
up to 2 x 6 m/s (23 ft./sec) |
Power supply |
32 A / 400 V |
Power consumption | typical 3.9 kW; maximum 10 kW |
Dimensions (B x T x H) |
|
System |
2,500 mm x 1,300 mm x 2,190 mm |
Recommended installation space |
min. 4.8 m x 4.8 m x 3.0 m |
Weight |
approx. 2.300 kg |
Software |
|
PSW 3.8 with EOSAME feature, EOSTATE System with Online Laser Power Control, EOSPRINT 2 with SmartScaling feature, EOSCONNECT | |
Material |
|
HT-23 from Advanced Laser Materials (ALM) | |
Optional accessories |
|
IPCM P plus, CoolDown Station, Unpacking and Sieving Station, Blasting Cabinet |
To contact Betta Machine Tools about EOS P 810 - 3D Printer Laser Sintering System – Plastics use Get a quote.
With a building volume of 700 x 380 x 380 mm, EOS P 810 enables a fast and cost efficient production of plastic parts directly from CAD data. Parts made out of HT-23 material offer high strength at low weight and withstand high temperatures.
Efficiency
Thanks to improved recoating speed, fast digital scanners and high-power lasers the building time is significantly reduced and thus productivity increased.
Quality
HT-23 a Polyether ketone ketone (PEKK) material with encapsulated carbon fiber reinforcement is inherently flame retardant, UV resistant and meets regulations of the aerospace (FAR 25.853) and mobility industry (EN 45545).
Sustainability
With a low refresh rate (60% recyclable, little excess powder) HT-23 is contributing to substantially reduce cost-per-part.
EOS P 810 |
|
Building volume |
700 mm x 380 mm x 380 mm (27.6 x 15 x 15 in) |
Laser type | CO2, 2 x 70 W |
Building rate |
up to 10 mm/h (0.4 in/h); up to 2,7l/h |
Layer thickness: ALM HT-23 |
120 μm (Other thicknesses technically possible) |
Precision optics |
F-theta lenses, high-speed scanners |
Scan speed during building process |
up to 2 x 6 m/s (23 ft./sec) |
Power supply |
32 A / 400 V |
Power consumption | typical 3.9 kW; maximum 10 kW |
Dimensions (B x T x H) |
|
System |
2,500 mm x 1,300 mm x 2,190 mm |
Recommended installation space |
min. 4.8 m x 4.8 m x 3.0 m |
Weight |
approx. 2.300 kg |
Software |
|
PSW 3.8 with EOSAME feature, EOSTATE System with Online Laser Power Control, EOSPRINT 2 with SmartScaling feature, EOSCONNECT | |
Material |
|
HT-23 from Advanced Laser Materials (ALM) | |
Optional accessories |
|
IPCM P plus, CoolDown Station, Unpacking and Sieving Station, Blasting Cabinet |
To contact Betta Machine Tools about EOS P 810 - 3D Printer Laser Sintering System – Plastics use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product