Clark Masts WT Series Portable Masts
All WT series air-operated portable masts are members of Clark Masts' heavy duty Phase 2 Series
There are many applications where a Clark Masts PT or YT series telescopic portable mast does not have the lifting capacity or the extended height desired. Clark Masts WT series portable masts, also part of Clark's Phase 2 series, have greater strength and can reach greater heights by virtue of their 152.4 mm (6 inch) diameter base tube.
With a maximum extended height of 30 metres most Clark Masts WT series portable telescopic masts have to be transported in the horizontal position. One option for doing this is the use of one of Clark Masts optional Roof Trolleys, as shown at left. Clark Masts have developed over many years, these accessories which enable the mast to be carried horizontally on the vehicle roof and swung into a vertical position when required to operate. All have been made to enable the equipment to be handled by one man in safety, not withstanding the heavy construction.
Often used unguyed up to 20 metres, guying adds stability in windy conditions to any of the WT series portable masts. Guying collars, which allow the mast to still be rotated, are now a standard factory fitting for guying at 90 or 120 degrees (3 or 4 way guying). A Guy Winch , operated by one man and which tensions all guys simultaneously, is available and recommended for extension above 20 metres in windy conditions.
The WT series of portable masts incorporates all of the design features of Clark Masts PT and YT portable masts. Similarly there is a full range of general Accessories as well as Installation Accessories to allow these portable masts to be installed on a shelter, a vehicle or field mounted through use of a stand-alone tripod assembly. All WT series portable masts are supplied with guy rings and mounting hardware for turning or non-turning applications. A range of Air Supply options is also available, including Hand Pumps, 12/24 Volts DC and 230/110 Volt AC Air Source/Mast Compressors, Petrol powered compressors and accessories to allow a vehicle's air source to be used.
Where a portable mast, ready to use without installation, is required, Clark Masts offer WT masts carried on purpose built trailers, the 802 Trailer Mast Series.
Clark Masts WT Series Portable Masts
Mechanical Specifications
Telescopic Mast Sections:
Heat-treated aluminium allow.
Castings:
Die cast aluminium alloy LM6
Finishes:
Finish, zinc plated and passivated.
Paint, standard colour white.
Mast sections clear anodised.
On Special Order: Nato Green paint with green anodised
mast sections or Desert Sand with yellow anodised
mast sections..
Operating Temperatures:
+55 to -40 degrees C (Dry).
Other Features
Clark Masts WT Series Combined (Locking) Collar portable masts have mast section clamps for semi-permanent erection with the air supply removed. Clark Masts WT Series Plain (Non-Locking) Collar portable masts require a continuous air supply to remain erect. All Clark Masts WT Series portable masts have keyed sections to prevent individual rotation of sections, allowing the headload to be rotated through rotation of the entire mast.
Clark Masts WT Series masts are often used unguyed. However, whenever strong winds may occur, guys must be used. A range of guying accessories is available for all Clark Masts WT Series masts.
To contact Portable Masts Australia about Clark Masts WT Series Portable Masts use Get a quote.
All WT series air-operated portable masts are members of Clark Masts' heavy duty Phase 2 Series
There are many applications where a Clark Masts PT or YT series telescopic portable mast does not have the lifting capacity or the extended height desired. Clark Masts WT series portable masts, also part of Clark's Phase 2 series, have greater strength and can reach greater heights by virtue of their 152.4 mm (6 inch) diameter base tube.
With a maximum extended height of 30 metres most Clark Masts WT series portable telescopic masts have to be transported in the horizontal position. One option for doing this is the use of one of Clark Masts optional Roof Trolleys, as shown at left. Clark Masts have developed over many years, these accessories which enable the mast to be carried horizontally on the vehicle roof and swung into a vertical position when required to operate. All have been made to enable the equipment to be handled by one man in safety, not withstanding the heavy construction.
Often used unguyed up to 20 metres, guying adds stability in windy conditions to any of the WT series portable masts. Guying collars, which allow the mast to still be rotated, are now a standard factory fitting for guying at 90 or 120 degrees (3 or 4 way guying). A Guy Winch , operated by one man and which tensions all guys simultaneously, is available and recommended for extension above 20 metres in windy conditions.
The WT series of portable masts incorporates all of the design features of Clark Masts PT and YT portable masts. Similarly there is a full range of general Accessories as well as Installation Accessories to allow these portable masts to be installed on a shelter, a vehicle or field mounted through use of a stand-alone tripod assembly. All WT series portable masts are supplied with guy rings and mounting hardware for turning or non-turning applications. A range of Air Supply options is also available, including Hand Pumps, 12/24 Volts DC and 230/110 Volt AC Air Source/Mast Compressors, Petrol powered compressors and accessories to allow a vehicle's air source to be used.
Where a portable mast, ready to use without installation, is required, Clark Masts offer WT masts carried on purpose built trailers, the 802 Trailer Mast Series.
Clark Masts WT Series Portable Masts
Mechanical Specifications
Telescopic Mast Sections:
Heat-treated aluminium allow.
Castings:
Die cast aluminium alloy LM6
Finishes:
Finish, zinc plated and passivated.
Paint, standard colour white.
Mast sections clear anodised.
On Special Order: Nato Green paint with green anodised
mast sections or Desert Sand with yellow anodised
mast sections..
Operating Temperatures:
+55 to -40 degrees C (Dry).
Other Features
Clark Masts WT Series Combined (Locking) Collar portable masts have mast section clamps for semi-permanent erection with the air supply removed. Clark Masts WT Series Plain (Non-Locking) Collar portable masts require a continuous air supply to remain erect. All Clark Masts WT Series portable masts have keyed sections to prevent individual rotation of sections, allowing the headload to be rotated through rotation of the entire mast.
Clark Masts WT Series masts are often used unguyed. However, whenever strong winds may occur, guys must be used. A range of guying accessories is available for all Clark Masts WT Series masts.
To contact Portable Masts Australia about Clark Masts WT Series Portable Masts use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product