Cembre Crimper - 13T | B1300-CT

Cembre - Crimper - 13T | B1300-CT

Crimper - 13T | B1300-CT

13T Battery Crimper Li-Ion Self standing: The B1300-CT is suitable for a wide range of connectors up to 400mm2 using all semi-circular slotted dies common to Cembre 130 kN tools.

In Stock

New Li-Ion 18V 4 Ah batteries offer a higher capacity than 14.4V 3 Ah, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a more rapid approach of the dies to the connector then a more controlled, powerful speed for crimping. The crimping head can rotate through 180 degrees for ease of operation while a large 25mm jaw allows easier introduction/removal of compression terminations and joints. A maximum pressure sensor and security valve together assure greater precision and repeatability of the pressure cycle and double the provision for operator safety.

Product Features:

Greater crimping speed and force
Maximum pressure sensor and security valve for greater precision and operator safety
Bi-component plastic shell provides high resistance to wear and damage
Rubber grip
Low noise and minimal vibration for operator comfort
LED lighting area for additional convenience and safety
Crimping cycle data (up to 200,000 events) stored on memory card for transfer to PC by USB interface

Battery Features:

Provides 100% of its energy between -15 deg C and 50 deg C
Electronic control of single cells to avoid overcharging and undercharging
Air-cooled charging technology to increase battery life
Quickest charging time
Auto-off to optimise energy consumption

Product Specifications:

Crimping Force: 132kN
Dimensions:
Length: 406mm
Height: 239mm
Width: 102.5mm
Battery: Li-Ion 18V 4.0 Ah
Weight (with battery): 6.5kg

The B1300-CT is supplied with:

Battery and shoulder strap
Spare battery
Battery charger
Plastic carrying case suitable for storing the tool and die sets

OLED Display

The OLED display provides essential real time tool operating information data including:

Minimum set force and momentary force reached expressed in kN (confirms correct operation
Minimum set force and momentary force reached expressed in US Ton (confirms correct operation)
Minimum set pressure and momentary pressure reached expressed in bar (confirm correct operation)
Minimum set pressure and momentary pressure reached expressed in Psi (confirm correct operation)
Battery charge level
No. of cycles performed and No. of cycles recommended before scheduled maintenance
Cembre logo, tool model and tool serial No.
LED Worklights (On and Off)
Return to factory settings/firmware version

To contact MSS Data Solutions about Cembre Crimper - 13T | B1300-CT use Get a quote.

Greater crimping speed and force
Maximum pressure sensor and security valve for greater precision and operator safety
Bi-component plastic shell provides high resistance to wear and damage
Rubber grip
Low noise and minimal vibration for operator comfort
LED lighting area for additional convenience and safety
Crimping cycle data (up to 200,000 events) stored on memory card for transfer to PC by USB interface