Cassel Food Metal Detector | Metal Shark® ...

Cassel - Food Metal Detector | Metal Shark® GF

Supplier: OFI Weigh & Inspection

Food Metal Detector | Metal Shark® GF

Metal Detection for Free-Falling Products is a critical safety measure designed to protect the quality and integrity of bulk materials during processing.

Metal Shark® GF

Reliably detects metals in free-falling goods
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy installation
Maintenance-free through automatic balance and calibration control
ATEX-version for use in explosion endangered environments
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety

Features

Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Documentation of all events and metal messages
Simple setup with Teach Assistant, pre-set product types like salty, sweet, wet, dry etc.
IFS and HACCP reports available on the display at the simple push of a button
Memory for up to 250 products
Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
Easy to use with intuitive and multilingual menus
Cyclical function monitoring with Performance Validation System (PVS)
4-level password system, automatic log out after time lapse

Function

The METAL SHARK^® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contamination in continuously flowing granulates or powders such as sugar, flour, grain or even plastic granules.

The sensitive sensors detect the smallest metal contaminants, and fast-switching separation flaps discharge them directly from the product stream during ongoing production.

Specifications

Electronics
Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
Input
2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for reject confirmation
Output
2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. for metal or acoustic alarm
Inspection method
High-frequency magnetic field, multi-channel operation, symmetrical receiver coils
Metal detection
Ferrous, non-ferrous (e.g. aluminium or copper) und stainless steel
Product compensation
Memory for up to 250 products, automatic product compensation, with TeachAssistant
Enclosure rating
IP65 (optionally IP66)
Environmental conditions for controller
-30°C to +40°C / -22°F to 104°F, UL version: -20°C to +40°C / -4°F to 104°F, rel. humidity 20% up to 90% (non-condensing) Option: -40°C / -40°F or +55°C / 131°F
Environmental conditions for sensor
-30°C to +60°C / -22°F to 140°F Option: up to +90° C / 194°F
Temperature of goods inspected
Standard: -30°C up to 55°C / -22°F up to 131°F Option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
Power supply
One phase 110-230 V AC, typ. consumption 20 W (max. 60 W)
Interface
RS232, provides documentation according to HACCP- and IFS-standard, USB- or ethernet option
Maintenance
Maintenance-free, self calibrating sensors
Diagnostics
Integrated diagnostic software, automatic self-test

SHARKNET®
The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance.
BRC-Kit
BRC-Kit for a fail-safe system according to the guidelines of the British Retail Consortium with metal detection alarm, product counter, product jam monitoring, required covers, rejection system as wel as monitoring of container (container full), air pressure of the reject system and reject functionality.
High temperature extension for product
Product temperature up to max. +120°C, with this option the sensor has protection class IP54.
LPW/HPW
Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics.
Signalling devices (optical/acoustic)
Stacking lights and signal horns/sirens available in different versions and IP protection classes.
ATEX version
Version for use in potentially explosive environments possible, ATEX zone 22.
Compressed air monitoring
Reports an error if the air pressure is too low for the functionality of the reject flaps.
Reject monitoring
Warns if the reject flap has not switched correctly after metal detection.
Flap position monitoring
Monitors the flaps for complete switching to the good or not good position.
Check & Catch
Material for simple functional testing, consisting of an insertion flap, through which spherical test specimens can be inserted into the pipeline, and a catchment grille for the test specimen including removal flap.
Autotest
Functional test that does not require opening the product pipelines: Test pieces (FE/NFE/VA) are moved with compressed air through a separate test tube. The control unit indicates which sphere sizes are to be tested. Incl. push button for FE, NFE and VA testing, pneumatic valve, test specimen.
Test balls
Test balls, diameter 25 mm made of plastic POM, with embedded metal ball made of iron, brass and stainless steel, certified ball size, metal type and certificate number are embedded in the test ball.
Performance Verification Certificate
Issue of a Performance Verification Certificate (proof of functionality for audits) by CASSEL service technicians, e.g. during commissioning or maintenance.

Delivery Scope

Detection unit (sensor) GF incl. mounting frame
Control unit METAL SHARK^®
Rejection unit (also available without reject system)
POM pipe for detection zone incl. quick clamping rings

Applications

Monitoring of loose, free-falling or compressed air conveyed products in pipelines
Quality assurance for incoming goods, outgoing goods or during running production
Machine protection, e.g. for mills or extruders

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | Metal Shark® GF use Get a quote.

Metal Shark® GF

Reliably detects metals in free-falling goods
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy installation
Maintenance-free through automatic balance and calibration control
ATEX-version for use in explosion endangered environments
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety

Features

Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Documentation of all events and metal messages
Simple setup with Teach Assistant, pre-set product types like salty, sweet, wet, dry etc.
IFS and HACCP reports available on the display at the simple push of a button
Memory for up to 250 products
Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
Easy to use with intuitive and multilingual menus
Cyclical function monitoring with Performance Validation System (PVS)
4-level password system, automatic log out after time lapse

Function

The sensitive sensors detect the smallest metal contaminants, and fast-switching separation flaps discharge them directly from the product stream during ongoing production.

Specifications

Electronics
Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
Input
2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for reject confirmation
Output
2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. for metal or acoustic alarm
Inspection method
High-frequency magnetic field, multi-channel operation, symmetrical receiver coils
Metal detection
Ferrous, non-ferrous (e.g. aluminium or copper) und stainless steel
Product compensation
Memory for up to 250 products, automatic product compensation, with TeachAssistant
Enclosure rating
IP65 (optionally IP66)
Environmental conditions for controller
-30°C to +40°C / -22°F to 104°F, UL version: -20°C to +40°C / -4°F to 104°F, rel. humidity 20% up to 90% (non-condensing) Option: -40°C / -40°F or +55°C / 131°F
Environmental conditions for sensor
-30°C to +60°C / -22°F to 140°F Option: up to +90° C / 194°F
Temperature of goods inspected
Standard: -30°C up to 55°C / -22°F up to 131°F Option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
Power supply
One phase 110-230 V AC, typ. consumption 20 W (max. 60 W)
Interface
RS232, provides documentation according to HACCP- and IFS-standard, USB- or ethernet option
Maintenance
Maintenance-free, self calibrating sensors
Diagnostics
Integrated diagnostic software, automatic self-test

SHARKNET®
The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance.
BRC-Kit
BRC-Kit for a fail-safe system according to the guidelines of the British Retail Consortium with metal detection alarm, product counter, product jam monitoring, required covers, rejection system as wel as monitoring of container (container full), air pressure of the reject system and reject functionality.
High temperature extension for product
Product temperature up to max. +120°C, with this option the sensor has protection class IP54.
LPW/HPW
Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics.
Signalling devices (optical/acoustic)
Stacking lights and signal horns/sirens available in different versions and IP protection classes.
ATEX version
Version for use in potentially explosive environments possible, ATEX zone 22.
Compressed air monitoring
Reports an error if the air pressure is too low for the functionality of the reject flaps.
Reject monitoring
Warns if the reject flap has not switched correctly after metal detection.
Flap position monitoring
Monitors the flaps for complete switching to the good or not good position.
Check & Catch
Material for simple functional testing, consisting of an insertion flap, through which spherical test specimens can be inserted into the pipeline, and a catchment grille for the test specimen including removal flap.
Autotest
Functional test that does not require opening the product pipelines: Test pieces (FE/NFE/VA) are moved with compressed air through a separate test tube. The control unit indicates which sphere sizes are to be tested. Incl. push button for FE, NFE and VA testing, pneumatic valve, test specimen.
Test balls
Test balls, diameter 25 mm made of plastic POM, with embedded metal ball made of iron, brass and stainless steel, certified ball size, metal type and certificate number are embedded in the test ball.
Performance Verification Certificate
Issue of a Performance Verification Certificate (proof of functionality for audits) by CASSEL service technicians, e.g. during commissioning or maintenance.

Delivery Scope

Detection unit (sensor) GF incl. mounting frame
Control unit METAL SHARK^®
Rejection unit (also available without reject system)
POM pipe for detection zone incl. quick clamping rings

Applications

Monitoring of loose, free-falling or compressed air conveyed products in pipelines
Quality assurance for incoming goods, outgoing goods or during running production
Machine protection, e.g. for mills or extruders

Read less...

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | Metal Shark® GF use Get a quote.

Let OFI Weigh & Inspection provide you with a quote

Supplier

Get a quote

Supplier: OFI Weigh & Inspection

Distribution: Australia & New Zealand

Location: Hoppers Crossing, VIC

Customers: Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OFI Weigh & Inspection are also proudly displaying these credentials:

Established:

2015

Employees:

6-20

Customers:

Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Memberships:

NMI, NATA, BRC

Distribution:

Australia & New Zealand

Location:

Hoppers Crossing , VIC

Joined:

Nov 2021

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product

Checkweigher | C80

X-ray Inspection System For Food & Nonfood Products | Xray 3280

Checkweigher | C80 Combination

Inline Metal Detector | FSCAN 4500 DP – Pipe

X-ray Inspection System for Food & Non-food Products | Xray 6500

X-Ray Inspection System | Combi

X-ray Inspection System For Food & Non-food Products | Xray 4280

X-ray Inspection System for Food & non-food Products | Xray 3280L

Food Metal Detector | Gravity Fall Detector | Conveyor System HW

Metal Detector with auto reject | Shark

Food Metal Detector | Conveyor HQ

Gravity Fall Detector - Metal Detector

Food Metal Detector | Metal Shark® BD

Checkweighers | C80 Checkweigher Grader

Food Metal Detector | Metal Shark® GF

Checkweigher | C20

Food Metal Detector | Metal Shark® Ina Meat

Food Metal Detector | Metal Shark® In Meat

Food Metal Detector | Metal Shark® PH

Food Metal Detector | Metal Shark® IN Liquid

Contact OFI Weigh & Inspection

Food Metal Detector in Melbourne

Food Metal Detector in Adelaide

Food Metal Detector in Sydney

Food Metal Detector in Darwin

Food Metal Detector in Brisbane

Food Metal Detector in Perth

Are you a Food Metal Detector supplier?

Reach valuable industrial buyers in minutes

Promote key products & content

Drive cost effective & measurable sales

learn more

Cassel - Food Metal Detector | Metal Shark® GF Get latest price

Metal Detection for Free-Falling Products is a critical safety measure designed to protect the quality and integrity of bulk materials during processing.

Food Metal Detector

Sheet Metal Bending Machine

Metal Cutting Machine

Scrap Metal Recycling Baler & Shredder

Radiation Detector

Checkweigher | C80

X-ray Inspection System For Food & Nonfood Products | Xray 3280

Checkweigher | C80 Combination

Inline Metal Detector | FSCAN 4500 DP – Pipe

X-ray Inspection System for Food & Non-food Products | Xray 6500

X-Ray Inspection System | Combi

X-ray Inspection System For Food & Non-food Products | Xray 4280

X-ray Inspection System for Food & non-food Products | Xray 3280L

Food Metal Detector | Gravity Fall Detector | Conveyor System HW

Metal Detector with auto reject | Shark

Food Metal Detector | Conveyor HQ

Gravity Fall Detector - Metal Detector

Food Metal Detector | Metal Shark® BD

Checkweighers | C80 Checkweigher Grader

Food Metal Detector | Metal Shark® GF

Checkweigher | C20

Food Metal Detector | Metal Shark® Ina Meat

Food Metal Detector | Metal Shark® In Meat

Food Metal Detector | Metal Shark® PH

Food Metal Detector | Metal Shark® IN Liquid

Food Metal Detector | Metal Shark® BD

Food Metal Detector | Metal Shark® GF Compact

Food Metal Detector | Metal Shark® IN Liquid

Food Metal Detector | Metal Shark® PH

Food Metal Detector | Metal Shark® Big

Food Metal Detector | Metal Shark® In Meat

Food Metal Detector | Metal Shark® Ina Meat

Food Metal Detector | Metal Shark® Big Pba

Food Metal Detector | Metal Shark® Big RD

Food Metal Detector | Metal Shark® Fl & Fl Compact

Food Metal Detector | Metal Shark® Combi

Food Metal Detector | Metal Shark® Combi Tu

Food Metal Detector | Metal Shark® Octa

Food Metal Detector | Metal Shark® Tu

Pharmaceutical & Food Metal Detector | Metal Shark® R

Food Metal Detector | C80 Shark Combi

CEIA Metal Detectors | CEIA THS/21 Standard Metal Detector

Metal Detector Systems - MCD Metal Detectors

Metal detector coils | Metal detector Vistus

Cassel - Food Metal Detector | Metal Shark® GF