Becker UHF Leaky Feeder Radio System | ...
Becker Electronics Engineer, Manufacture the Smart com UHF leaky feeder system for underground mines globally.
The leaky feeder system allows the monitoring and control of electrical equipment such as fans and pumps and can provide 100% coverage of underground mines when used in conjunction with mobile and portable two way radios.
Installed around the world with many Australia installations the Becker UHF Leaky Feeder system is a reliable and robust communications platform for all installation types
The system is designed to provide seamless two-way communications throughout an underground mine or tunnel. This is achieved through the use of Leaky Feeder antenna cables. The radio signals from the Head End, which is typically located on the surface, are transmitted throughout the underground travel-ways over the leaky feeder cabling system. The signal is also easily retransmitted on surface and can cover the surrounding areas for several kilometres.
Coaxial cable is designed to keep as much signal as possible within the cable, and to block any external signals. Leaky Feeder cable is designed to ‘leak’ or radiate the radio signal out, as well as allow signals in from remote radio transceivers within 50 - 200 meters from the Leaky Feeder cable. To sustain the signal levels over long distances, Line Amplifiers (or boosters) are inserted along the Leaky feeder cable run, nominally every 350m.
To contact Becker Mining Systems about Becker UHF Leaky Feeder Radio System | Smart Com use Get a quote.
Becker Electronics Engineer, Manufacture the Smart com UHF leaky feeder system for underground mines globally.
The leaky feeder system allows the monitoring and control of electrical equipment such as fans and pumps and can provide 100% coverage of underground mines when used in conjunction with mobile and portable two way radios.
Installed around the world with many Australia installations the Becker UHF Leaky Feeder system is a reliable and robust communications platform for all installation types
The system is designed to provide seamless two-way communications throughout an underground mine or tunnel. This is achieved through the use of Leaky Feeder antenna cables. The radio signals from the Head End, which is typically located on the surface, are transmitted throughout the underground travel-ways over the leaky feeder cabling system. The signal is also easily retransmitted on surface and can cover the surrounding areas for several kilometres.
Coaxial cable is designed to keep as much signal as possible within the cable, and to block any external signals. Leaky Feeder cable is designed to ‘leak’ or radiate the radio signal out, as well as allow signals in from remote radio transceivers within 50 - 200 meters from the Leaky Feeder cable. To sustain the signal levels over long distances, Line Amplifiers (or boosters) are inserted along the Leaky feeder cable run, nominally every 350m.
To contact Becker Mining Systems about Becker UHF Leaky Feeder Radio System | Smart Com use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product