ATP Strong Spiral Cable / Hose

ATP - Strong Spiral Cable / Hose

Supplier: Advanced Technology Pneumatics

Strong Spiral Cable / Hose

This spiral series was developed to correct 2 of the most common problems inherent in spiral hoses used in heavy duty rate production applications: Tangling and Kinking when used constantly at the maximum working length.

In Stock

A special manufacturing process allows ATP to make a much smaller coil diameter without any flattening of the tube or reduction in flow. This smaller coil diameter directly improves coil memory even in the most demanding applications. Sag is significantly reduced and hence kinking problems virtually eliminated when fittings correctly attached.

Manufactured from Shore A 98 durometer polyurethane Strong tubing these spirals yield a working length approx 60% of total length. Tails are standard 100mm and 500mm however can be customized to suit your application.

We recommend type DS, DSR & DH fittings only for Strong coil hoses.

Features & Benefits

Smallest coil OD in the industry
Best coil memory of any spiral in the industry
Tangle resistant and kink proof
Smooth tube bore for optimum flow
Optionally fitted with various couplings or threaded fittings
NSF 51® certification for common water & food applications

Specifications

Working Temperature Range:
- -5 to 60ºC (Compressed Air)
- 0 to 40ºC (Water)
Working Pressure: 145psi (10 Bar)
Burst Pressure: 450psi (30 Bar)

Custom sizes, colours and durometers are available with minimum order quantity

Spiral Hose Terminology

Working Length
This is optimum stretch length from end to end. Always best established by measuring the required distance the hose is required to stretch.

A overall compressed length
This is the overall compressed length from end to end.

B & D tail lengths
These are the straight lengths at either end of the spiral.
Typically for spiral hoses these are 100mm (short tail) and 500mm (long tail).

C compressed coil or number of turns
This is the compressed coil section only. It can also be described as the counted number of turns.

E coil outside diameter
Determined by the tube size. Can be customized to change stretch ratio.

Part Numbering

Part Number	Size (mm)	Work Length (M)	Total Turns	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)
ST-8-2	8 x 5	1.4m	19	760	100	150	500	32
ST-8-4	8 x 5	2.5m	49	990	100	390	500	32
ST-8-6	8 x 5	3.8m	78	1250	100	620	500	32
ST-8-8	8 x 5	5.1m	113	1510	100	900	500	32
ST-10-4	10 x 6.5	2.4m	35	950	100	350	500	42
ST-10-6	10 x 6.5	3.3m	55	1150	100	550	500	42
ST-10-8	10 x 6.5	4.4m	79	1390	100	790	500	42
ST-12-4	12 x 8	2.4m	38	950	100	450	500	55
ST-12-6	12 x 8	6m	45	1140	100	540	500	55
ST-12-8	12 x 8	8m	64	1370	100	770	500	55
ST-16-4	16 x 11	4m	18	900	100	290	500	83
ST-16-6	16 x 11	6m	27	1040	100	430	500	83
ST-16-8	16 x 11	8m	37	1200	100	590	500	83

To contact Advanced Technology Pneumatics about ATP Strong Spiral Cable / Hose use Get a quote.