Astro GalvBar Galvanising Alloy Welding Electrode for sale from Astro Alloys

28 Recent Views In Stock

Astro GalvBar Galvanising Alloy has the following:

Applications

Primarily used to restore galvanised areas of sheet steel, angle iron, and other areas that have been welded or cut with an oxyacetylene torch.
It can also be used to protect structures that are too large or too costly to disassemble and dip in galvanising tanks.

Features

Welding Procedures:

Chip all slag from welds and wire brush loose scale from areas to be coated.
No flux is required.
While the metal is still hot, run Galvbar over the hot surface.
If the metal has cooled below 300 C, additional heat may be applied with a torch.
Spread the alloy over the surface with a brush or paddle.
Do not heat the alloy directly with a torch.

For more information please call or use the IndustrySearch Email form for a fast and direct reply.

To contact Astro Alloys about Astro GalvBar Galvanising Alloy Welding Electrode use Get a quote.

Astro GalvBar Galvanising Alloy has the following:

Applications

Primarily used to restore galvanised areas of sheet steel, angle iron, and other areas that have been welded or cut with an oxyacetylene torch.
It can also be used to protect structures that are too large or too costly to disassemble and dip in galvanising tanks.

Features

Welding Procedures:

Chip all slag from welds and wire brush loose scale from areas to be coated.
No flux is required.
While the metal is still hot, run Galvbar over the hot surface.
If the metal has cooled below 300 C, additional heat may be applied with a torch.
Spread the alloy over the surface with a brush or paddle.
Do not heat the alloy directly with a torch.

For more information please call or use the IndustrySearch Email form for a fast and direct reply.

To contact Astro Alloys about Astro GalvBar Galvanising Alloy Welding Electrode use Get a quote.