Aeronaut Laser Cutters I Elektron Laser ...
Aeronaut’s Neo laser cutters have been re-engineered to carry the latest and best lasers. All Aeronaut lasers with the Neo tag have been already redesigned and other models of lasers will be updated and delivered as a Neo design.
Features:
Higher cutting speeds. Watt for watt, the Neo lasers, especially the pulse versions, cut faster and on light materials, much much faster.
The cut zone is much smaller and cleaner with a pulse laser. This is a direct result of the pulse but also the finer beam focus point at the cut zone. Materials which might be discoloured by fumes around the cut edge with a CW laser are now very much cleaner or there is no visible mark at all.
Linear bearings are now used on the gantry of all Aeronaut lasers which enhances the fine detail work that lasers are capable of.
Laser power control through software has been greatly improved. On most fabrics, you can now reliably mark the fabric without through-cutting. Perforation with dots or segmented lines is more reliable and regular.
Maintenance is lower. Most lasers now feature purge ports and the positive pressurisation of beam path components has been expanded to include the entire beam path. This means cleaner optics and less maintenance on mirrors and lenses.
Fume extraction is better. The fume shroud is larger and better vented. An axial fan can be optionally mounted on the laser to improve extraction flow.
Greater compatibility. Now, almost all lasers have a 48 volt power supplies, making maintenance and upgrades easier.
To contact Aeronaut Automation about Aeronaut Laser Cutters I Elektron Laser ZT & ZP use Get a quote.
Aeronaut’s Neo laser cutters have been re-engineered to carry the latest and best lasers. All Aeronaut lasers with the Neo tag have been already redesigned and other models of lasers will be updated and delivered as a Neo design.
Features:
Higher cutting speeds. Watt for watt, the Neo lasers, especially the pulse versions, cut faster and on light materials, much much faster.
The cut zone is much smaller and cleaner with a pulse laser. This is a direct result of the pulse but also the finer beam focus point at the cut zone. Materials which might be discoloured by fumes around the cut edge with a CW laser are now very much cleaner or there is no visible mark at all.
Linear bearings are now used on the gantry of all Aeronaut lasers which enhances the fine detail work that lasers are capable of.
Laser power control through software has been greatly improved. On most fabrics, you can now reliably mark the fabric without through-cutting. Perforation with dots or segmented lines is more reliable and regular.
Maintenance is lower. Most lasers now feature purge ports and the positive pressurisation of beam path components has been expanded to include the entire beam path. This means cleaner optics and less maintenance on mirrors and lenses.
Fume extraction is better. The fume shroud is larger and better vented. An axial fan can be optionally mounted on the laser to improve extraction flow.
Greater compatibility. Now, almost all lasers have a 48 volt power supplies, making maintenance and upgrades easier.
To contact Aeronaut Automation about Aeronaut Laser Cutters I Elektron Laser ZT & ZP use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product