AAQ Autolift Car Stacker Post Parking Lift ...
The AL-HP2525 3 car stacker is designed to conveniently allow you to stack 3 vehicles when limited space is available. With a total lifting capacity of 4500kg (2500kg first platform/2000kgs second platform) and a generous headroom between platforms of 2100mm the stacker can store a wide range of vehicles.
Designed to withstand tough Australian conditions with a high-quality powder-coated finish and galvanised trays you can rest assured the range of HP car stackers is one of the best on the market!
Simple key switch operation makes it a breeze to operate and is ideal for various parking applications such as workshops, office buildings, valet parking, car rental locations, vehicle service centers or anywhere extra parking is required.
The HP2525 uses a much simpler and more reliable system than some competitors on the market, the lower platform is the master platform and is used to push/lift the upper platform up onto its locks.
Once the upper platform reaches the top of the column the four locks engage securing the platform in place. The lower platform is lowered down to the ground for the second car to be loaded. The lower platform can then be raised to the desired height.
A full locking ladder is incorporated into each column for the lower platform locks to engage in when rested. A safety limit switch will cut the operation of the platform at 2100mm from the ground. To take the vehicle higher simply turn the key switch back to center and back to raise – be careful when exceeding the safety limit switch height so accidental crashing of the vehicle to the upper platform does not occur.
To contact AAQ Australia - Advance AutoQuip about AAQ Autolift Car Stacker Post Parking Lift | 3 Car HP2525 4 Post Storage Hoist use Get a quote.
The AL-HP2525 3 car stacker is designed to conveniently allow you to stack 3 vehicles when limited space is available. With a total lifting capacity of 4500kg (2500kg first platform/2000kgs second platform) and a generous headroom between platforms of 2100mm the stacker can store a wide range of vehicles.
Designed to withstand tough Australian conditions with a high-quality powder-coated finish and galvanised trays you can rest assured the range of HP car stackers is one of the best on the market!
Simple key switch operation makes it a breeze to operate and is ideal for various parking applications such as workshops, office buildings, valet parking, car rental locations, vehicle service centers or anywhere extra parking is required.
The HP2525 uses a much simpler and more reliable system than some competitors on the market, the lower platform is the master platform and is used to push/lift the upper platform up onto its locks.
Once the upper platform reaches the top of the column the four locks engage securing the platform in place. The lower platform is lowered down to the ground for the second car to be loaded. The lower platform can then be raised to the desired height.
A full locking ladder is incorporated into each column for the lower platform locks to engage in when rested. A safety limit switch will cut the operation of the platform at 2100mm from the ground. To take the vehicle higher simply turn the key switch back to center and back to raise – be careful when exceeding the safety limit switch height so accidental crashing of the vehicle to the upper platform does not occur.
To contact AAQ Australia - Advance AutoQuip about AAQ Autolift Car Stacker Post Parking Lift | 3 Car HP2525 4 Post Storage Hoist use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product