String Potentiometer SP Series
These compact linear position precision string potentiometers range from 0-50 inches (1270mm).
Available in 5 different types:
Voltage Divider - SP1
This compact string pot with “voltage divider” output, provides ease-of-use and ?exibility for measurement ranges up to 50 inches. Made of rugged polycarbonate, the SP1 fits in small spaces, doesn’t need perfect alignment and ships with a stainless steel mounting bracket to let the user easily orient this sensor in just about any direction imaginable.
The SP1 is available with a connector, mating plug and sensor cover to protect against IP67 (wet) environments and a lower cost, “open” sensor version priced for both the budget conscious single piece user and the OEM alike.
Voltage Divider (with 40" electrical cable) - SP2
The SP2 String Pot is a compact, economical and water resistant device that utilises a flexible cable, a spring-loaded spool and a potentiometer to detect and measure linear position.
The SP2 is identical to the SP1 except for an added 40-inch electrical cable with a watertight rubber strain relief. The SP2 has been compactly designed for tight spaces and high cycle applications and generously allows for measuring cable misalignment.
4 ... 20mA (2 wire) - SP3
The SP3 is a compact, economical string pot that provides a user selectable 4-20mA or 0-10 VDC output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired output.
4 ... 20mA / 0 ... 10 VDC - SPD
This compact stringpot provides the ultimate in ease-of-use and flexibility. This sensor fits in small spaces, doesn’t need perfect alignment, mounts in just about any direction imaginable and has a unique circuit that lets the user choose 4-20mA or 0-10VDC output on the fly.
Incremental Encoder - SE1
The SE1 is the digital encoder version of our compact String Pot series. The SE1 is an economical and durable device that utilises a flexible cable, a spring-loaded spool and an incremental optical encoder to detect and measure linear position.
To contact IDM Instruments about String Potentiometer SP Series use Get a quote.
These compact linear position precision string potentiometers range from 0-50 inches (1270mm).
Available in 5 different types:
Voltage Divider - SP1
This compact string pot with “voltage divider” output, provides ease-of-use and ?exibility for measurement ranges up to 50 inches. Made of rugged polycarbonate, the SP1 fits in small spaces, doesn’t need perfect alignment and ships with a stainless steel mounting bracket to let the user easily orient this sensor in just about any direction imaginable.
The SP1 is available with a connector, mating plug and sensor cover to protect against IP67 (wet) environments and a lower cost, “open” sensor version priced for both the budget conscious single piece user and the OEM alike.
Voltage Divider (with 40" electrical cable) - SP2
The SP2 String Pot is a compact, economical and water resistant device that utilises a flexible cable, a spring-loaded spool and a potentiometer to detect and measure linear position.
The SP2 is identical to the SP1 except for an added 40-inch electrical cable with a watertight rubber strain relief. The SP2 has been compactly designed for tight spaces and high cycle applications and generously allows for measuring cable misalignment.
4 ... 20mA (2 wire) - SP3
The SP3 is a compact, economical string pot that provides a user selectable 4-20mA or 0-10 VDC output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired output.
4 ... 20mA / 0 ... 10 VDC - SPD
This compact stringpot provides the ultimate in ease-of-use and flexibility. This sensor fits in small spaces, doesn’t need perfect alignment, mounts in just about any direction imaginable and has a unique circuit that lets the user choose 4-20mA or 0-10VDC output on the fly.
Incremental Encoder - SE1
The SE1 is the digital encoder version of our compact String Pot series. The SE1 is an economical and durable device that utilises a flexible cable, a spring-loaded spool and an incremental optical encoder to detect and measure linear position.
To contact IDM Instruments about String Potentiometer SP Series use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product