Signode Steel Strapping | Seals

Signode - Steel Strapping | Seals

Supplier: Signode Australia & New Zealand

Thread On/Pusher Seal

Steel Strapping | Seals

PNSC Thread On/OPusher Seal

Thread-on push type seals must be threaded over the overlapping strap ends before the tensioning tool is applied. Used where strap is tensioned by butting the nose of the Tensioner against the seal. Used with: steel strapping. Australian Made.

Australian Made

In Stock

Ideal for round or irregular shaped bundles, push-type seals are used with a push-type tensioner to secure steel strapping. The flanges on a push-type seal completely overlap so both strap ends must be manually pre-threaded through the push seal before tensioning. These seals are usually crowned to prevent them from migrating too far into the hand tool during tensioning. A reverse notch joint is typically used to secure push-type seals.

LONG PUSHER SEALS

ITEM NUMBER	THREAD ON - PUSHER SEALS	STEEL STRAP WIDTH
521265	PNSC12 SEAL CARTON 1000	12MM
521276	PNSC 58 SEAL CARTON 1000	16MM
521287	PNSC 34 SEAL CARTON 1000	19MM

SHORT PUSHER SEALS

ITEM NUMBER	THREAD ON SEALS - PUSHER SEALS	STEEL STRAP WIDTH
522321	3436P SEAL CARTON 500	19MM
522365	5436P SEAL CARTON 500	32MM
522332	3436P SEAL CARTON 500 GALVANISED	19MM

To contact Signode Australia & New Zealand about Signode Steel Strapping | Seals use Get a quote.

LONG PUSHER SEALS

ITEM NUMBER	THREAD ON - PUSHER SEALS	STEEL STRAP WIDTH
521265	PNSC12 SEAL CARTON 1000	12MM
521276	PNSC 58 SEAL CARTON 1000	16MM
521287	PNSC 34 SEAL CARTON 1000	19MM

SHORT PUSHER SEALS

ITEM NUMBER	THREAD ON SEALS - PUSHER SEALS	STEEL STRAP WIDTH
522321	3436P SEAL CARTON 500	19MM
522365	5436P SEAL CARTON 500	32MM
522332	3436P SEAL CARTON 500 GALVANISED	19MM