Anton Paar Rotational Viscometer ViscoQC ...
Available in L, R & H variants to meet you viscosity range.
results are directly exported or printed via the Brother QL-700 label printer after each test.
Setup takes less than two minutes: ViscoQC comes preassembled and includes an SOP booklet with first steps and straightforward user training. Our rotational viscometers guide you from startup through the entire measurement process via an intuitive user interface. Continue to use the SOP methods of your existing rotational viscometer: ViscoQC uses the same instrument setup and measuring settings to deliver the same results. Spindles with magnetic coupling for easy, fast, and safe spindle exchange come as standard. Replace Brookfield type viscometers.
Make your viscosity measurements error-proof and 100% traceable with our unique Toolmaster™ feature: spindles are automatically detected by the viscometer as soon as they’re attached. With ViscoQC 300, you can further restrict each method to a unique spindle identity. Furthermore, all connected accessories are detected and documented as well:
Built-in digital leveling automatically monitors and indicates the correct levelling status, which prevents faulty measurements and ensures remarkable, full-scale range accuracy of ± 1%. If you need to measure new formulations, ViscoQC automatically leads you to the right spindle/speed configuration using TruMode™
You can upgrade your ViscoQC with accessories to cover any need:
You can add other software functionality to ViscoQC 300 with V-Curve, adding real-time graphs, analysis (e.g., yield point), programmability, and extended method functionality.
Since ViscoQC uses highly durable bearings and regularly performs an automatic bearing check (TruSine™), your uptime is maximized and ongoing service costs are reduced to a minimum. All of our spindles are made of superior stainless steel (AISI 316L), which increases spindle lifetime by protecting them from corrosion.
ViscoQC 100 | ViscoQC 300 | |||||
---|---|---|---|---|---|---|
L | R | H | L | R | H | |
Viscosity test | Single-point | Multi-point | ||||
Viscosity range [mPa.s or cP] (depends on measuring system) |
0.2* to 6 M | 1.6** to 40 M | 13.2*** to 320 M | 0.1* to 6 M | 1.3** to 40 M | 10.6*** to 320 M |
Speed [rpm] | 0.1 rpm to 200 rpm 740 increments |
0.01 rpm to 250 rpm Speed list with 18 standard speeds Freely selectable speeds within the speed range |
||||
Max. spring torque [mNm] | 0.0673 | 0.7187 | 5.7496 | 0.0673 | 0.7187 | 5.7496 |
Accuracy | ±1.0 % full scale range | |||||
Repeatability | ±0.2 % full scale range | |||||
Heli-Plus compatibility | ? | |||||
PTD 100 Cone-Plate compatibility | ? | |||||
ETD 300 compatibility | ? | |||||
Peltier temperature control |
+15 °C to +80 °C 0 °C to + 100 °C |
+15 °C to +80 °C 0 °C to + 100 °C |
||||
Electrical temperature control | +25 °C to +300 °C (for SSA/DIN with ETD 300) | |||||
Liquid temperature control/sensing | Ambient to +100 °C (control of L/RH spindles with optional thermostat bath) | |||||
Temperature sensing | -60 °C to +300 °C (temperature sensing with optional Pt100) | |||||
Intuitive user interface | 3.5" color LCD display | 7" color touchscreen display; Options: keyboard, mouse, 2D bar code reader |
||||
Languages | EN, DE, ES, FR, CN, JA, KO, IT, RU, PT | EN, DE, ES, FR, IT, PT, JA, KO, RU, ZH-CN, ZH-TW, PO, CZE | ||||
Built-in digital leveling | ? | |||||
Easiest spindle exchange (magnetic coupling) | ? | |||||
Automatic spindle recognition (Toolmaster™) | ? | |||||
Automatic measuring range calculation | ? | |||||
Automatic speed searching function (TruMode™) | ? | |||||
Spindle correction by user | ? | |||||
Users, user groups | None | ? Customizable |
* With optional PTD 100 Cone-Plate, with L1 spindle 15 mPa.s
** With optional PTD 100 Cone-Plate, with RH1 spindle 100 mPa.s
*** With optional PTD 100 Cone-Plate, with RH1 spindle 800 mPa.s
M = million
DIN = Concentric cylinders, double-gap
SSA = Small sample adapter (SC4-xx)
UL = Ultra-low viscosity adapter
To contact Anton Paar Australia about Anton Paar Rotational Viscometer ViscoQC 300 use Get a quote.
Available in L, R & H variants to meet you viscosity range.
results are directly exported or printed via the Brother QL-700 label printer after each test.
Setup takes less than two minutes: ViscoQC comes preassembled and includes an SOP booklet with first steps and straightforward user training. Our rotational viscometers guide you from startup through the entire measurement process via an intuitive user interface. Continue to use the SOP methods of your existing rotational viscometer: ViscoQC uses the same instrument setup and measuring settings to deliver the same results. Spindles with magnetic coupling for easy, fast, and safe spindle exchange come as standard. Replace Brookfield type viscometers.
Make your viscosity measurements error-proof and 100% traceable with our unique Toolmaster™ feature: spindles are automatically detected by the viscometer as soon as they’re attached. With ViscoQC 300, you can further restrict each method to a unique spindle identity. Furthermore, all connected accessories are detected and documented as well:
Built-in digital leveling automatically monitors and indicates the correct levelling status, which prevents faulty measurements and ensures remarkable, full-scale range accuracy of ± 1%. If you need to measure new formulations, ViscoQC automatically leads you to the right spindle/speed configuration using TruMode™
You can upgrade your ViscoQC with accessories to cover any need:
You can add other software functionality to ViscoQC 300 with V-Curve, adding real-time graphs, analysis (e.g., yield point), programmability, and extended method functionality.
Since ViscoQC uses highly durable bearings and regularly performs an automatic bearing check (TruSine™), your uptime is maximized and ongoing service costs are reduced to a minimum. All of our spindles are made of superior stainless steel (AISI 316L), which increases spindle lifetime by protecting them from corrosion.
ViscoQC 100 | ViscoQC 300 | |||||
---|---|---|---|---|---|---|
L | R | H | L | R | H | |
Viscosity test | Single-point | Multi-point | ||||
Viscosity range [mPa.s or cP] (depends on measuring system) |
0.2* to 6 M | 1.6** to 40 M | 13.2*** to 320 M | 0.1* to 6 M | 1.3** to 40 M | 10.6*** to 320 M |
Speed [rpm] | 0.1 rpm to 200 rpm 740 increments |
0.01 rpm to 250 rpm Speed list with 18 standard speeds Freely selectable speeds within the speed range |
||||
Max. spring torque [mNm] | 0.0673 | 0.7187 | 5.7496 | 0.0673 | 0.7187 | 5.7496 |
Accuracy | ±1.0 % full scale range | |||||
Repeatability | ±0.2 % full scale range | |||||
Heli-Plus compatibility | ? | |||||
PTD 100 Cone-Plate compatibility | ? | |||||
ETD 300 compatibility | ? | |||||
Peltier temperature control |
+15 °C to +80 °C 0 °C to + 100 °C |
+15 °C to +80 °C 0 °C to + 100 °C |
||||
Electrical temperature control | +25 °C to +300 °C (for SSA/DIN with ETD 300) | |||||
Liquid temperature control/sensing | Ambient to +100 °C (control of L/RH spindles with optional thermostat bath) | |||||
Temperature sensing | -60 °C to +300 °C (temperature sensing with optional Pt100) | |||||
Intuitive user interface | 3.5" color LCD display | 7" color touchscreen display; Options: keyboard, mouse, 2D bar code reader |
||||
Languages | EN, DE, ES, FR, CN, JA, KO, IT, RU, PT | EN, DE, ES, FR, IT, PT, JA, KO, RU, ZH-CN, ZH-TW, PO, CZE | ||||
Built-in digital leveling | ? | |||||
Easiest spindle exchange (magnetic coupling) | ? | |||||
Automatic spindle recognition (Toolmaster™) | ? | |||||
Automatic measuring range calculation | ? | |||||
Automatic speed searching function (TruMode™) | ? | |||||
Spindle correction by user | ? | |||||
Users, user groups | None | ? Customizable |
* With optional PTD 100 Cone-Plate, with L1 spindle 15 mPa.s
** With optional PTD 100 Cone-Plate, with RH1 spindle 100 mPa.s
*** With optional PTD 100 Cone-Plate, with RH1 spindle 800 mPa.s
M = million
DIN = Concentric cylinders, double-gap
SSA = Small sample adapter (SC4-xx)
UL = Ultra-low viscosity adapter
To contact Anton Paar Australia about Anton Paar Rotational Viscometer ViscoQC 300 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product