HT Instruments PV-ISOTEST 1,500V Photovoltaic ...

HT Instruments - PV-ISOTEST 1,500V Photovoltaic Safety Tester

Supplier: OBIAT Electronics Pty Ltd

PV-ISOTEST 1,500V Photovoltaic Safety Tester

Multifunction instrument for electrical safety testing and troubleshooting of photovoltaic systems up to 1,500V DC

Video for HT Instruments PV-ISOTEST 1,500V Photovoltaic Safety Tester

63 Recent Views 1-3 weeks (Accepting orders)

- Insulation measurement up to 1,500V DC even on live systems

- Localization of the faulty module through the new GFL function

- Continuity of the protective conductor with 200mA

PV-ISOTEST measures the insulation resistance of a single module, a string or even an entire photovoltaic field up to 1,500 V DC in accordance to the IEC/EN62446 standard. Traditional insulation meters would require a DC-rated switch-box to short-circuit the positive and negative terminals of the module/string/PV field under test. With PV-ISOTEST the use of any external device is not required, PV-ISOTEST carries out the measurements in full autonomy and self-sufficiency. In addition, through the new GFL (Ground Fault Locator) function, PV-ISOTEST indicates the position of any poor insulation on a string of the photovoltaic system, due, for example, to water or humidity leakage.

Measurement category	CAT III 1500V DC / CAT III 1000V AC
AC TRMS voltage measurement	3 - 1000V
DC voltage measurement	3 - 1500V
Insulation resistance	250, 500, 1000, 1500V
GFL function to locate the fault position in the string
Measurement of polarization index P.I.
Dielectric absorption ratio D.A.R
Continuity of protective conductors with 200mA
Size (LxWxH) (mm)	235 x 165 x 75mm
Weight	1.2kg

- Insulation measurement up to 1,500V DC even on live systems

- Localization of the faulty module through the new GFL function

- Continuity of the protective conductor with 200mA

PV-ISOTEST measures the insulation resistance of a single module, a string or even an entire photovoltaic field up to 1,500 V DC in accordance to the IEC/EN62446 standard. Traditional insulation meters would require a DC-rated switch-box to short-circuit the positive and negative terminals of the module/string/PV field under test. With PV-ISOTEST the use of any external device is not required, PV-ISOTEST carries out the measurements in full autonomy and self-sufficiency. In addition, through the new GFL (Ground Fault Locator) function, PV-ISOTEST indicates the position of any poor insulation on a string of the photovoltaic system, due, for example, to water or humidity leakage.

Measurement category	CAT III 1500V DC / CAT III 1000V AC
AC TRMS voltage measurement	3 - 1000V
DC voltage measurement	3 - 1500V
Insulation resistance	250, 500, 1000, 1500V
GFL function to locate the fault position in the string
Measurement of polarization index P.I.
Dielectric absorption ratio D.A.R
Continuity of protective conductors with 200mA
Size (LxWxH) (mm)	235 x 165 x 75mm
Weight	1.2kg

Read less...

To contact OBIAT Electronics Pty Ltd about HT Instruments PV-ISOTEST 1,500V Photovoltaic Safety Tester use Get a quote.

HT PV-ISOTEST(0.86MB)

Let OBIAT Electronics Pty Ltd provide you with a quote

Supplier

Get a quote

Supplier: OBIAT Electronics Pty Ltd

Distribution: Australia Wide

Location: Castle Hill, NSW

Customers: Electricians, Power, Mining, End Users

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OBIAT Electronics Pty Ltd are also proudly displaying these credentials:

Established:

1986

Employees:

1-5

Customers:

Electricians, Power, Mining, End Users

Certifications:

All Products Certified

Distribution:

Australia Wide

Location:

Castle Hill , NSW