On-Belt Elemental Analyser | GEOSCAN - M
This compound array overcomes the limitations of conventional, low efficiency detection systems. The GEOSCAN spectrometer can operate at much higher count rates than conventional systems, with lower pulse pile-up. This innovation vastly improves the signal to noise ratio and spectral peak resolution.
GEOSCAN - M Applications
Real time elemental analysis provides active control over ore and concentrates quality, with timely information on various elements to make decisions that optimises process control, maximises the value of the resource and minimises operating costs.
GEOSCAN - M On-Belt Elemental Analyser Advantages:
Typical elements analysed
Calcium, Silicon, Aluminium, Copper, Zinc, Nickel, Iron, Potassium, Titanium, Manganese, Sulphur, Chlorine, Magnesium and Sodium.
This premium technology provides real time analysis of the important quality parameters for process control. The analyser is fully contained in the single, heavily shielded enclosure that contains the radioactive source, gamma-ray detection assembly and all electronics. Industry standard communication outputs are available for interface with any plant control system or with Scantech’s SuperSCAN output display system installed in any suitable remote location.
For your peace of mind we can offer you Free Testwork on your Samples to asses the suitability of the technology to each application. This removes any concern over buying a system where performance for your application would otherwise be uncertain.
We provide money back performance guarantees on our analysers.
To find out more about this On-Belt Elemental Analyser please call or use the IndustrySearch email form for a direct reply.
To contact Scantech International about On-Belt Elemental Analyser | GEOSCAN - M use Get a quote.
This compound array overcomes the limitations of conventional, low efficiency detection systems. The GEOSCAN spectrometer can operate at much higher count rates than conventional systems, with lower pulse pile-up. This innovation vastly improves the signal to noise ratio and spectral peak resolution.
GEOSCAN - M Applications
Real time elemental analysis provides active control over ore and concentrates quality, with timely information on various elements to make decisions that optimises process control, maximises the value of the resource and minimises operating costs.
GEOSCAN - M On-Belt Elemental Analyser Advantages:
Typical elements analysed
Calcium, Silicon, Aluminium, Copper, Zinc, Nickel, Iron, Potassium, Titanium, Manganese, Sulphur, Chlorine, Magnesium and Sodium.
This premium technology provides real time analysis of the important quality parameters for process control. The analyser is fully contained in the single, heavily shielded enclosure that contains the radioactive source, gamma-ray detection assembly and all electronics. Industry standard communication outputs are available for interface with any plant control system or with Scantech’s SuperSCAN output display system installed in any suitable remote location.
For your peace of mind we can offer you Free Testwork on your Samples to asses the suitability of the technology to each application. This removes any concern over buying a system where performance for your application would otherwise be uncertain.
We provide money back performance guarantees on our analysers.
To find out more about this On-Belt Elemental Analyser please call or use the IndustrySearch email form for a direct reply.
To contact Scantech International about On-Belt Elemental Analyser | GEOSCAN - M use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product