NOVOTEST - Combined Hardness Tester NOVOTEST T-UD3 Get latest price

Read more...

To contact NDT Equipment Sales about NOVOTEST Combined Hardness Tester NOVOTEST T-UD3 use Get a quote.

Applications for this product

• Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.
• The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.

Features of this product

• hardness measurement of any mass products with a thickness of 1 mm – inaccessible to the dynamic (Leeb) hardness testers (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness control of metal coatings, etc.)
• small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
• measuring the hardness of the surface hardened layer
• wide range of hardness
• various measurement modes
• calibration of any scale in any range
• convenience and ease of measurement
• large full color graphic display with bright backlighting
• automatic recognition of probe
• indication of the type of connected probe
• calibrations stored in memory of probe.
• extended temperature range (frost, down to - 40°C)
• internal memory and communication with PC
• new, intuitive menu with tips on the buttons
• optional wireless mini printer
• water resistant case
• rubber bumper protected case

Why choose this product

• Leaves relatively large dent. Suitable for low finished surfaces. Surface finish equivalent to 30 grind or better.
• Considered to be the Universal type for most general applications. 50N of downward hand pressure is required to activate the probe. Surface finish equivalent to 80 grind or better.
• Load is easy to apply; provides control to test on a sharp radius. Only 10N of downward hand pressure is required to activate the probe. Surface finish equivalent to 150 grind or better.

Specifications of this product

• UCI probe types 1 kgf (10N) 2.2 lbf, 5 kgf (50N) 11 lbf, 10 kgf (98N) 22 lbf
• Leeb probe types D, DC, DL, C, D+15, E, G
• Measuring range HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
• Measuring accuracy HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
• Indenter Diamond Indenter (UCI), Hardened ball (Leeb)
• Measuring direction Any direction 360°
• Data storage Limited only by the memory card
• Communication Upload data to PC and export as a spreadsheet (USB cable and software included )
• Hardness scale HRC, HB, HV, HRB, HS, HL, MPa
• Materials - Ultrasonic (UCI) probe - pre-calibrated for steel. - Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper. - Additional custom materials for calibration.
• Data display Load applied/contact (UCI), Angle (Leeb), Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and Smart Mode (Filter of incorrect measurements).
• Indication Color LCD display (320x240)
• Operating environment Temperature: -20°C ~40°C; Humidity: 30%~80%R.H.
• Power supply DC 4,5V (3 pc batteries AA)
• Instrument dimensions 160x75x30 mm
• Net weight Approx. 0.3kg (Without probe)
• Battery life Approx. 10 hours. 

Read less...

To contact NDT Equipment Sales about NOVOTEST Combined Hardness Tester NOVOTEST T-UD3 use Get a quote.