Distance sensor for distance measurement from 0.1 up to 150 meter.
Description
112 Recent ViewsCall for more details
The sensor measures on all natural surfaces, except glass and water.This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 100 meters (0.66 ft. up to 328 ft.) Further than 30 metres (98.5 ft.) with a reflexion foil.
The measuring module is working contactless according to the principle of phase comparison measurement.
With aid of the red pilot beam, the adjustment of the sensor is quite simple.
Inch precise measurement on any surfaces. Two types are available, with a sampling rate from 1 to 10 Hz or with 50 Hz.
Due to the small light point diameter (from 6 mm) (0.24 in.), measurements in narrow pipes are possible.
The electronics is integrated into the sensor head.
The output of measurement results are served via data interface RS232 / RS 422 (switchable). A fieldbus connection is possible.
Preferred areas of application:
height measurement
distance measurement
monitoring (e.g. cranes, transport systems)
fill level measurement (e.g. bulk materials)
position identification
object sensing, -recordal, -control
security application
To contact Applied Measurement Australia about Laser Sensor | MEL M10 Laser Distance Sensor use Get a quote.
The sensor measures on all natural surfaces, except glass and water.This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 100 meters (0.66 ft. up to 328 ft.) Further than 30 metres (98.5 ft.) with a reflexion foil.
The measuring module is working contactless according to the principle of phase comparison measurement.
With aid of the red pilot beam, the adjustment of the sensor is quite simple.
Inch precise measurement on any surfaces. Two types are available, with a sampling rate from 1 to 10 Hz or with 50 Hz.
Due to the small light point diameter (from 6 mm) (0.24 in.), measurements in narrow pipes are possible.
The electronics is integrated into the sensor head.
The output of measurement results are served via data interface RS232 / RS 422 (switchable). A fieldbus connection is possible.