Keller Water-cooled Pressure Transducer ...
The actual sensor, an integrated silicon cell with four diffused strain gauge resistors, is located in the water-cooled section of the oil-filled body. The oil transmits the pressure from the flush steel diaphragm to the sensor, isolating it from the temperature of the media. This means that very accurate pressure measurements can be made over a wide temperature range without influencing the pressure or flow conditions.
This pressure sensor is available in pressure ranges from 10 to 1000 bar. Linearity is <0.5% full scale (down to 0.1% FS for lower FS) and repeatability is an impressive 0.1% FS.
Originally developed for blow down tests on water-cooled reactors, this pressure sensor also finds applications in high temperature chemical reactions and engine tests.
The pressure sensor uses a stainless steel 1.4435 diaphragm, while the same material is used for the housing.
This pressure sensor is availablThe actual sensor, an integrated silicon cell with four diffused strain gauge resistors, is located in the water-cooled section of the oil-filled body. The oil transmits the pressure from the flush steel diaphragm to the sensor, isolating it from the temperature of the media. This means that very accurate pressure measurements can be made over a wide temperature range without influencing the pressure or flow conditions.
This pressure sensor is available in pressure ranges from 10 to 1000 bar. Linearity is <0.5% full scale (down to 0.1% FS for lower FS) and repeatability is an impressive 0.1% FS.
Originally developed for blow down tests on water-cooled reactors, this pressure sensor also finds applications in high temperature chemical reactions and engine tests.
The pressure sensor uses a stainless steel 1.4435 diaphragm, while the same material is used for the housing.
This pressure sensor is available in Australia and New Zealand from Bestech Australia Pty Ltd. e in Australia and New Zealand from Bestech Australia Pty Ltd
To contact Bestech Australia about Keller Water-cooled Pressure Transducer - Series 13 by Bestech Australia use Get a quote.
The actual sensor, an integrated silicon cell with four diffused strain gauge resistors, is located in the water-cooled section of the oil-filled body. The oil transmits the pressure from the flush steel diaphragm to the sensor, isolating it from the temperature of the media. This means that very accurate pressure measurements can be made over a wide temperature range without influencing the pressure or flow conditions.
This pressure sensor is available in pressure ranges from 10 to 1000 bar. Linearity is <0.5% full scale (down to 0.1% FS for lower FS) and repeatability is an impressive 0.1% FS.
Originally developed for blow down tests on water-cooled reactors, this pressure sensor also finds applications in high temperature chemical reactions and engine tests.
The pressure sensor uses a stainless steel 1.4435 diaphragm, while the same material is used for the housing.
This pressure sensor is availablThe actual sensor, an integrated silicon cell with four diffused strain gauge resistors, is located in the water-cooled section of the oil-filled body. The oil transmits the pressure from the flush steel diaphragm to the sensor, isolating it from the temperature of the media. This means that very accurate pressure measurements can be made over a wide temperature range without influencing the pressure or flow conditions.
This pressure sensor is available in pressure ranges from 10 to 1000 bar. Linearity is <0.5% full scale (down to 0.1% FS for lower FS) and repeatability is an impressive 0.1% FS.
Originally developed for blow down tests on water-cooled reactors, this pressure sensor also finds applications in high temperature chemical reactions and engine tests.
The pressure sensor uses a stainless steel 1.4435 diaphragm, while the same material is used for the housing.
This pressure sensor is available in Australia and New Zealand from Bestech Australia Pty Ltd. e in Australia and New Zealand from Bestech Australia Pty Ltd
To contact Bestech Australia about Keller Water-cooled Pressure Transducer - Series 13 by Bestech Australia use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product