Dynamometer Panel Indicator | Model 5014 - Instrotech Australia

Panel Mount Dynamometer Indicator - Model 5014

Instrotech's Model 5014 has many features of more expensive dynamometers in an easy to use indicator where inline force, torque or power measurements are required.

23 Recent Views In Stock

All the features of more expensive systems are included in one indicator. The indicator features a full 5½ digit LED display (-199999 to 199999). Inputs to the instrument include load cell input and proximity sensor or encoder input.

Excitation for load cells is supplied as is a DC supply for the proximity switch or encoder. The stable bridge excitation output voltage includes sense feedback to compensate for line variations.

The precision differential instrumentation opamp front end ensures high stability and accuracy for millivolt inputs from the load cells in the dynamometer system.

Options of Dynamometer - Model 5014 include analog output for external power indication or control, up to four alarms, RS232 or RS485 communications and many others. The calibration method is simple and easy.

Pre-calibrated ranges can be allocated zero and full scale values and these can be adjusted on site to allow for back-balance (deadweight) offset and single point span calibration (test weight trim).

This instrument meets CE and C-Tick EMC and EMI and Low Voltage directives.

Features of Model 5014 Dynamometer Panel Indicator:

DIN 48 x 96 enclosure, 147mm deep
-199999 to 199999 counts display
14.2mm high bright red LED display
Low cost - high performance design
Touch button ranging and setpoint adjustment
10 V (-5V to +5V) loadcell excitation with sense feedback included as standard
Excitation power for up to three loadcells standard
18 - 24 V power supply for shaft encoders included as standard
Flow rate analog output option with programmable zero and span
RS232 or RS485 communications option

More Information on Dynamometer - Model 5014 >>

To contact Instrotech Australia about Dynamometer Panel Indicator | Model 5014 - Instrotech Australia use Get a quote.

Excitation for load cells is supplied as is a DC supply for the proximity switch or encoder. The stable bridge excitation output voltage includes sense feedback to compensate for line variations.

The precision differential instrumentation opamp front end ensures high stability and accuracy for millivolt inputs from the load cells in the dynamometer system.

Pre-calibrated ranges can be allocated zero and full scale values and these can be adjusted on site to allow for back-balance (deadweight) offset and single point span calibration (test weight trim).

This instrument meets CE and C-Tick EMC and EMI and Low Voltage directives.

Features of Model 5014 Dynamometer Panel Indicator:

DIN 48 x 96 enclosure, 147mm deep
-199999 to 199999 counts display
14.2mm high bright red LED display
Low cost - high performance design
Touch button ranging and setpoint adjustment
10 V (-5V to +5V) loadcell excitation with sense feedback included as standard
Excitation power for up to three loadcells standard
18 - 24 V power supply for shaft encoders included as standard
Flow rate analog output option with programmable zero and span
RS232 or RS485 communications option

More Information on Dynamometer - Model 5014 >>

Read less...

To contact Instrotech Australia about Dynamometer Panel Indicator | Model 5014 - Instrotech Australia use Get a quote.

Let Instrotech Australia provide you with a quote

Supplier

Get a quote

Supplier: Instrotech Australia

Distribution: Australia wide

Location: Rostrevor, SA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Instrotech Australia are also proudly displaying these credentials:

Established:

1993

Employees:

1-5

Distribution:

Australia wide

Location:

Rostrevor , SA

Joined:

May 2017

Level:

Standard Storefront