Anton Paar Dynamic Shear Rheometer | ...

Anton Paar - Dynamic Shear Rheometer | SmartPave

Supplier: Anton Paar Australia

Dynamic Shear Rheometer | SmartPave

The dynamic shear rheometer (DSR) SmartPave 102e allow precise measurements on asphalt binder, bitumen, crumbed rubber and PMB. Complies with AASHTO, DIN, ASTM and AGPT standards, with guided workbooks to ensure error free operation!

Video for Anton Paar Dynamic Shear Rheometer | SmartPave

Robust asphalt rheometer for QC and R&D

Key features

Two models to cover the whole spectrum of rheological asphalt and bitumen testing

The well-established SmartPave dynamic shear rheometers are able to analyze unmodified and modified asphalt binder and bitumen within a wide temperature range, either according to standards or by means of classic rheological methods. While SmartPave 102e is the instrument which meets the highest measurement demands, SmartPave 92 is designed especially for the demands of quality control and routine measurements in asphalt test labs.

The RheoCompass software: New paths for asphalt and bitumen testing

RheoCompass is a navigation tool that gives you the complete overview as well as the exact insights you require. It contains numerous templates that are tailored specifically to the needs of the asphalt industry. The predefined test procedures contain step-by-step instructions for all test types as defined by AASHTO, ASTM, DIN EN, and FGSV.

Unique accessories for easy handling

SmartPave 92’s and SmartPave 102e’s unique temperature control unit is the first Peltier heating system with heating elements above and below the sample. Furthermore, the instruments feature Toolmaster™ – the only completely contact-free automatic tool recognition and configuration system for rheometers. It recognizes measuring systems and temperature control units as soon as they are connected to the rheometer. Entering your data manually will become a thing of the past.

Fully automatic temperature calibration

Anton Paar offers fully automatic temperature calibration and verification routines in the RheoCompass software. Temperature accuracy and stability are crucial in asphalt testing. The unique automatic temperature calibration routine ensures temperature gradients <0.1 °C.

Upgrade your SmartPave DSR to a BBR

Enhance your SmartPave 102e or 92 with a specialized software solution from our cooperation partner, Pavement Systems LLC. Connect effortlessly to this external analysis software and unlock a range of features, including iCCL testing. This is a powerful surrogate method to BBR (AASHTO PP112), which gives you information about the low temperature PG-grade as well as m-value, S, and delta TC within 30 minutes. Learn more about Pavement Systems and their analysis solutions.

Experienced experts close to you

Anton Paar’s worldwide service network ensures that an expert on your system is always close by. Numerous installed instruments around the globe, an extensive application database, and cooperation with civil engineering institutes confirm that Anton Paar is the first choice for answering any rheological question on your asphalt binder and bitumen you might have.

Technical specifications

Technical Data	Unit	SmartPave 92	SmartPave 102e
Bearing design	-	Air, fine-pored carbon
Motor design	-	Electronically Commutated (EC) - Permanent Magnet Synchronous Motor
Displacement transducer design	-	High-resolution optical encoder
Normal force measurment design (US Pat. 6167752,1996)	-	-	360 ° capacitive sensor, non-contacting, fully integrated in bearing
Working mode	-	Combined Motor Transducer (CMT)
Minimum torque (rotation)	nNm	1 µNm	5
Minimum torque (oscillation)	nNm	1 µNm	2
Maximum torque	mNm	125	200
Minimum angular deflection (set value)	µrad	1	0.5
Maximum angular deflection (set value)	µrad	∞	∞
Minimum angular velocity[1]	rad/s	0	0
Maximum angular velocity	rad/s	157	314
Maximum speed	1/min	1500	3000
Minimum speed (CSS/CSR)	1/min	10-3	10-7
Minimum angular frequency[2]	rad/s	10-4	10-7
Maximum angular frequency	rad/s	628	628
Maximum frequency[3]	HZ	100	100
Normal force range	N	-	-50 to 50
Normal force sensitivity	N	-	0.01
Minimum gap size change	µm	0.625	0.625
Dimensions (W x H x D)	mm	380 x 660 x 530	444 x 678 x 586
Weight	kg	33	42
Additional Device Features
Device display with remote control of software (decoupled from measuring sensor for mechanical and electromagnetic interference prevention)	-	Yes	Yes
Direct strain/stress controller	-	Yes	Yes
TruStrain™(sample adaptive controller)	-	No	Yes
TruRate™ (sample adaptive controller)	-	No	Optional
Raw data (LAOS, waveform)	-	No	Optional
Normal force profiles (set and read)	-	No	Yes
Velocity profiles, tack, squeeze	-	No	Yes
Automatic gap control/setting (AGC/AGS)	-	Yes	Yes
Electronic trim lock for measuring geometry	-	Yes	Yes
TruGap™ (permanent control of the real measuring gap) (US Pat. 6499336, 2000)	-	No	Optional
T-Ready™ (detection of sample temperature equilibrium time) (US Pat. 8904852, 2011)[4]	-	No	Yes
Toolmaster™ (measuring geometries and accessories, storing of zero-gap) (US Pat. 7275419, 2004)	-	Yes	Yes
QuickConnect Coupling for measuring geometries (one-hand operation, screwless)	-	Yes	Yes
Trimming mirror (360° blind sample spot prevention)	-	No	Yes
Three-point support of device (three robust feet for tool-free one hand alignment)	-	Yes	Yes
Three-point support for mounting of measuring cells (wobble prevention, no misalignment after changing of cells)	-	Yes	Yes
Maximum temperature range[4]	°C	-50 to +400	-160 to +1000
Virtually gradient-free temperature control (horizontal,vertical)	-	Yes	Yes
Temperature gradient >0.1 °C according to AASHTO and ASTM	-	Yes	Yes
CoolPeltier™ Peltier System with built-in cooling option that does not require additional accessories for counter cooling	°C	-5 to +200	-5 to +200
Pressure Cell	bar	No	up to 1000
Safe Gap™ normal force limiter during gap setting	-	Yes	No
TruRay™ dimmable illumination of sample area	-	Yes	No
RheoCompass Software
Asphalt standard operation procedures (SOP) with regular updates	-	Yes	Yes
Auto Update via Network	-	Optional	Optional
Fully automatic temperature calibration	-	Yes	Yes
Test and analysis designer	-	Yes	Yes
Report designer (with all test information for export and print)	-	Yes	Yes
Managed lab multiple clients and servers	-	Optional	Optional

In controlled shear stress (CSS) mode. In controlled shear rate (CSR) mode, depending on measuring point duration and sampling rate.
Theoretical value (duration per cycle = 2 years)
Higher frequencies are possible using multi-wave functionality (942 rad/s (150 Hz) or even higher, depending on measuring system and sample)
Depending on used temperature device

Key features

Two models to cover the whole spectrum of rheological asphalt and bitumen testing

The RheoCompass software: New paths for asphalt and bitumen testing

Unique accessories for easy handling

Fully automatic temperature calibration

Upgrade your SmartPave DSR to a BBR

Experienced experts close to you

Technical specifications

Technical Data	Unit	SmartPave 92	SmartPave 102e
Bearing design	-	Air, fine-pored carbon
Motor design	-	Electronically Commutated (EC) - Permanent Magnet Synchronous Motor
Displacement transducer design	-	High-resolution optical encoder
Normal force measurment design (US Pat. 6167752,1996)	-	-	360 ° capacitive sensor, non-contacting, fully integrated in bearing
Working mode	-	Combined Motor Transducer (CMT)
Minimum torque (rotation)	nNm	1 µNm	5
Minimum torque (oscillation)	nNm	1 µNm	2
Maximum torque	mNm	125	200
Minimum angular deflection (set value)	µrad	1	0.5
Maximum angular deflection (set value)	µrad	∞	∞
Minimum angular velocity[1]	rad/s	0	0
Maximum angular velocity	rad/s	157	314
Maximum speed	1/min	1500	3000
Minimum speed (CSS/CSR)	1/min	10-3	10-7
Minimum angular frequency[2]	rad/s	10-4	10-7
Maximum angular frequency	rad/s	628	628
Maximum frequency[3]	HZ	100	100
Normal force range	N	-	-50 to 50
Normal force sensitivity	N	-	0.01
Minimum gap size change	µm	0.625	0.625
Dimensions (W x H x D)	mm	380 x 660 x 530	444 x 678 x 586
Weight	kg	33	42
Additional Device Features
Device display with remote control of software (decoupled from measuring sensor for mechanical and electromagnetic interference prevention)	-	Yes	Yes
Direct strain/stress controller	-	Yes	Yes
TruStrain™(sample adaptive controller)	-	No	Yes
TruRate™ (sample adaptive controller)	-	No	Optional
Raw data (LAOS, waveform)	-	No	Optional
Normal force profiles (set and read)	-	No	Yes
Velocity profiles, tack, squeeze	-	No	Yes
Automatic gap control/setting (AGC/AGS)	-	Yes	Yes
Electronic trim lock for measuring geometry	-	Yes	Yes
TruGap™ (permanent control of the real measuring gap) (US Pat. 6499336, 2000)	-	No	Optional
T-Ready™ (detection of sample temperature equilibrium time) (US Pat. 8904852, 2011)[4]	-	No	Yes
Toolmaster™ (measuring geometries and accessories, storing of zero-gap) (US Pat. 7275419, 2004)	-	Yes	Yes
QuickConnect Coupling for measuring geometries (one-hand operation, screwless)	-	Yes	Yes
Trimming mirror (360° blind sample spot prevention)	-	No	Yes
Three-point support of device (three robust feet for tool-free one hand alignment)	-	Yes	Yes
Three-point support for mounting of measuring cells (wobble prevention, no misalignment after changing of cells)	-	Yes	Yes
Maximum temperature range[4]	°C	-50 to +400	-160 to +1000
Virtually gradient-free temperature control (horizontal,vertical)	-	Yes	Yes
Temperature gradient >0.1 °C according to AASHTO and ASTM	-	Yes	Yes
CoolPeltier™ Peltier System with built-in cooling option that does not require additional accessories for counter cooling	°C	-5 to +200	-5 to +200
Pressure Cell	bar	No	up to 1000
Safe Gap™ normal force limiter during gap setting	-	Yes	No
TruRay™ dimmable illumination of sample area	-	Yes	No
RheoCompass Software
Asphalt standard operation procedures (SOP) with regular updates	-	Yes	Yes
Auto Update via Network	-	Optional	Optional
Fully automatic temperature calibration	-	Yes	Yes
Test and analysis designer	-	Yes	Yes
Report designer (with all test information for export and print)	-	Yes	Yes
Managed lab multiple clients and servers	-	Optional	Optional

In controlled shear stress (CSS) mode. In controlled shear rate (CSR) mode, depending on measuring point duration and sampling rate.
Theoretical value (duration per cycle = 2 years)
Higher frequencies are possible using multi-wave functionality (942 rad/s (150 Hz) or even higher, depending on measuring system and sample)
Depending on used temperature device

Read less...

To contact Anton Paar Australia about Anton Paar Dynamic Shear Rheometer | SmartPave use Get a quote.

C92IP013EN-J_Brochure_SmartPave_screen(1.12MB)

XPAIP052EN-H_Brochure_Asphalt_Bitumen_Portfolio(4.55MB)

Let Anton Paar Australia provide you with a quote

Supplier

Get a quote

Supplier: Anton Paar Australia

Location: North Ryde, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Anton Paar Australia are also proudly displaying these credentials:

Location:

North Ryde , NSW

Joined:

Feb 2024

Level:

Premium Storefront

Verified:

Is this your product? Manage products / company details |

Report this product