Crane Cages - Safety & Goods Cages for ...

Crane Cages - Safety & Goods Cages for Cranes | WP-C

Supplier: R.J. Cox Engineering

WP-C Crane Cages for Goods & Personnel

WP-C Crane Cage Work Platform has been designed strictly per Australian Standard AS 1418.17 and is suitable for a maximum of two people

4335 Recent Views In Stock

WP-C Crane Cage Work Platform (Pictured Left)

Work performed in this cage shall be limited to tasks of short duration in situations where necessary to elevate personnel where it is not practicable to erect scaffolds or use a specially designed device.
Forkarm slippers are provided for transport purposes only.
The standard finish on the cage is painted enamel in 'Safety Yellow
All Crane Cages have a Load Test Certificate, Instructions for usage, Risk Control Measures and Workcover registration.
Suitable for two people
Safe Working Load (SWL) 250kg
Unit Weight 160kg
Pocket Size 165 x 65mm
Pocket Centres 775mm
Supplied with Lifting Chains
Current Pricing on WP-C Crane Cage Work Platform

CSP4 Crane Goods Cage (Pictured Right) is designed to convey loose or palleted goods using a Forklift or Crane.

Full-width gate allows 1200mm square pallets to be placed inside the cage if required.
Standard Cage is 1375mm square overall and 1200mm high with a gate opening of 1275mm.
Crane Lug Stacking corners allow the cage to be stacked on top of each other – 3 high when empty, two high when complete.
The standard finish of the cage is enamel painted over primed steel in "Safety Yellow".
4 point lift
Lift capacity 1000kg
Unit Weight 160kg
Also available with Sheet Metal sides
Pricing on Goods Cage for Cranes

BSN6 Brick Transport Cage Overhead Crane Lifting Attachments
Designed to safely convey pallets of Bricks or similar products to work locations via an overhead Crane. Suitable for 1200mm square pallets (1240mm clear inside) and up to 1500mm overall height.

Supplied standard as a "Flatpack" (1750 x 1370 x 475mm) or may be fully assembled upon request.
This unit is fully assembled with all side and roof panels and welded in place to make the team a permanent structure.
4 Point Lift
Lift Capacity 2000kg
Unit Weight 255kg
Up to 1500mm High Pallets
Tine Storage when not Hoisting
Zinc Plated Finish
Chains not included.
Further Information and Pricing

Gas Cylinder Crane Cage GCN-2:

GCN-2 Gas Cylinder Crane Cage has been designed to suit one type of Oxygen and one type of Acetylene gas cylinder.
Provision has been made to store all hoses inside the cage.
The cage is supplied with an internal load binder to fasten both cylinders securely.
Fitted with a Handle and 400mm air-inflated rubber wheels, this cage can be transported
manually or by Crane.
Single point lift
Safe Working Load (SWL) 250kg
Unit Weight 80kg
Painted Enamel Chassis/Rims

Overall Size 914 x 672 x 1370mm

To contact R.J. Cox Engineering about Crane Cages - Safety & Goods Cages for Cranes | WP-C use Get a quote.

WP-C Crane Cage Work Platform (Pictured Left)

Work performed in this cage shall be limited to tasks of short duration in situations where necessary to elevate personnel where it is not practicable to erect scaffolds or use a specially designed device.
Forkarm slippers are provided for transport purposes only.
The standard finish on the cage is painted enamel in 'Safety Yellow
All Crane Cages have a Load Test Certificate, Instructions for usage, Risk Control Measures and Workcover registration.
Suitable for two people
Safe Working Load (SWL) 250kg
Unit Weight 160kg
Pocket Size 165 x 65mm
Pocket Centres 775mm
Supplied with Lifting Chains
Current Pricing on WP-C Crane Cage Work Platform

CSP4 Crane Goods Cage (Pictured Right) is designed to convey loose or palleted goods using a Forklift or Crane.

Full-width gate allows 1200mm square pallets to be placed inside the cage if required.
Standard Cage is 1375mm square overall and 1200mm high with a gate opening of 1275mm.
Crane Lug Stacking corners allow the cage to be stacked on top of each other – 3 high when empty, two high when complete.
The standard finish of the cage is enamel painted over primed steel in "Safety Yellow".
4 point lift
Lift capacity 1000kg
Unit Weight 160kg
Also available with Sheet Metal sides
Pricing on Goods Cage for Cranes

Supplied standard as a "Flatpack" (1750 x 1370 x 475mm) or may be fully assembled upon request.
This unit is fully assembled with all side and roof panels and welded in place to make the team a permanent structure.
4 Point Lift
Lift Capacity 2000kg
Unit Weight 255kg
Up to 1500mm High Pallets
Tine Storage when not Hoisting
Zinc Plated Finish
Chains not included.
Further Information and Pricing

Gas Cylinder Crane Cage GCN-2:

GCN-2 Gas Cylinder Crane Cage has been designed to suit one type of Oxygen and one type of Acetylene gas cylinder.
Provision has been made to store all hoses inside the cage.
The cage is supplied with an internal load binder to fasten both cylinders securely.
Fitted with a Handle and 400mm air-inflated rubber wheels, this cage can be transported
manually or by Crane.
Single point lift
Safe Working Load (SWL) 250kg
Unit Weight 80kg
Painted Enamel Chassis/Rims

Overall Size 914 x 672 x 1370mm

Read less...

To contact R.J. Cox Engineering about Crane Cages - Safety & Goods Cages for Cranes | WP-C use Get a quote.

Let R.J. Cox Engineering provide you with a quote

Supplier

Get a quote

Supplier: R.J. Cox Engineering

Distribution: Australasia

Location: Mount Kuring-gai, NSW

Customers: Crown, Qantas, David Jones

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. R.J. Cox Engineering are also proudly displaying these credentials:

Established:

1938

Employees:

6-20

Customers:

Crown, Qantas, David Jones

Distribution:

Australasia

Location:

Mount Kuring-gai , NSW

Joined:

Jan 2006