Crack Measurement - U31 Crack Microgauge Get latest price

Read more...

To contact Russell Fraser Sales NDT about Crack Measurement - U31 Crack Microgauge use Get a quote.

U31 Crack Microgauge

The system comprises a topside power and comms unit, a subsea bottle and a subsea probe.

The system utilises advanced windows software developed by TSC which provides immediate and offline data viewing and includes reporting and data archiving.

Options:

System options for the U31 include:

• U31D Diver system for depths up to 300m
• U31R Remote Operated Vehicle (ROV) system for depths up to 2000m
• Dual-frequency option available for improved underwater sensitivity
• Support for multi-channel array probes

Features:

The U31 instrument offers the following:

• Rapid weld scanning using hand-held probes.
• Area scanning using multi-sensor array probes.
• Dual frequency capability:
  • 5kHz (Standard instrument for optimum performance on ferritic steel).
  • 50kHz (Additional option for improved sensitivity particularly on non-ferrous metals).
• Access to a wide range of geometries using TSC's range of active topside probes.
• Reduced component cleaning requirements with no need to clean to bare metal.
• Capable of inspection through thin metallic coatings, or through non-conducting coatings up to 5mm thick.

• WindowsTM based software for ease of operation and compatibility with other Windows applications.

Comparison

The Model U21 Crack Microgauge is in use around the world for subsea weld inspection. The Model U31 provides all the functionality of the Model U21 but in a significantly smaller package.

The U31 weighs only 4.3Kg in water and has a standard operational depth of 350 metres. In addition TSC offer a specialised system capable of operating at depths up to 2 kilometres.

Specification

Deployment

ACFMsystems have been used since 1991 for underwater inspection of offshore platforms, subsea structures and pipelines.

The U31 Underwater ACFM Crack Microgauge is the third generation instrument and represents a significant advance in ACFM subsea inspection technology from the previous U21.

The U31 instrument has all the advantages of ACFM inspection available on other TSC instruments in a small and light package designed specifically for diver and ROV deployment.

Diver Deployment

The diver deployed U31D is a top-side powered instrument, linked to a top-side PC and power supply via a single sub-sea cable. It is equipped with top cage to allow the diver to easily manoeuvre the instrument and provide an anchor point for a retaining rope or cable. The small size, light weight and ease of manoeuvrability translate into great versatility sub-sea and allows the instrument to be deployed from dive stations without the need for cranes or tuggers. The probes and communications cable use wet mateable connectors which allow them to be changed in a wet environment but not underwater.

ROV Deployment

Interface with ROV systems is straightforward. The probe is mounted onto an ROV manipulator and is deployed onto the inspection site. An umbilical is routed from the probe along the manipulator arm to the U31R subsea unit. The subsea unit takes it's power from the ROV and communications to and from the topside control box are via the ROV umbilical. The control box is then connected to a top-side PC running TSC's proprietary software.

Standard Probes

TSC standard single sensor and multi sensor probes are available for a variety of applications.

These are contained within three categories:

• Single Sensor
  Used for basic general weld inspection.
• Multi Sensor
  Used for wide area coverage with encoder and orientation options. Available in array configuration.
• Static Array
  Used for 'pick & place' manipulator or robotic deployment

Special Application Probes

Probes can be designed and manufactured for use in almost any environment or application.

Probes have recently been produced for clients for use in the following areas:

• Radiation hardened probe for nuclear applications.
• Probes for marine propellor and propulsor inspection.
• 'Pick & Place' array probes for ROV deployment.

Non-ACFM Probes

The U31 also supports the use of lift-off sensors. This includes probes for measuring marine fouling thickness,insulation thickness and pipe ovality.

ASSISTu

The current generation of underwater ACFM software is the ASSISTu (ACFM Software Suite for the Inspection of STructures Underwater). The original ACFM software, QFMu, for underwater manual probes only, is still available.

The ASSIST family of software has been developed for both portable and desktop PC's running standard Microsoft Windows XP/2000/NT/9x.

ASSISTu provides an easy to use large-button interface particularly suited for portable PC's with touch screens, whilst retaining familiar windows menus if preferred.

Many features and enhancements have been incorporated in this ACFM software, including:

• Data collection and display for both manual and array probes.
• Display of array probe data in real time.
• Ability to display both X field and Y field data with compatible array probes.
• Automatic data file naming and intuitive inspection file handling.
• Ability to "zoom" in on sections of data for closer examination.

The following ASSIST software packages are available for the AMIGO:

QFMu

An updated version of TSC's user friendly QFM software has been developed specifically for underwater applications. This takes advantage of the major improvements incorporated in the U31.

The U31 operates with TSC's QFMu software to provide a common operating environment with other ACFM products, avoiding the need for retraining of certified operators.

The following QFM software packages are available for the AMIGO:

Read less...

To contact Russell Fraser Sales NDT about Crack Measurement - U31 Crack Microgauge use Get a quote.