Belotti - Belotti NAVY & VEGA 5 Axis Gantry CNC Machining Centres Get latest price

A wide range of models enables to meet any dimensional and technological need.

Maximum flexibility is granted by this multi-purpose machining centre which allows both pattern making and trimming

of deck hulls, fiberglass parts and high-resistance composites.

AXIS

X: from 4m to 60m at 80m/min

Y: from 4.2m to 8.8m at 80m/min

Z: from 2m to 6.8m at 30m/min

SPINDLE: 15 or 22kW up to 36,000 rpm

VEGA are high-speed 5 axes machining centers featuring a motorized suspended bridge structure sliding on the two extremities.

They are made of very thick, welded heat treated steel. In order to provide a solution with a dynamically rigid structure,

the design of VEGA series has been optimized to offer a unique combination of performance, short machining times, flexibility,

high quality finish and long-term rigidity.

The linear axis movement is managed by powerful rack and pinion drives with two electronically preloaded servo motors on each side.

Electronic backlash recovery is obtained thanks to the digital servo-drive that generates a mechanical preload between the two pinions (mechanical coupling).

Delivery, commissioning, training and ongoing support Australia wide.

Please call for additional information.

To contact CNC Machinery Sales Australia about Belotti Belotti NAVY & VEGA 5 Axis Gantry CNC Machining Centres use Get a quote.

A wide range of models enables to meet any dimensional and technological need.

Maximum flexibility is granted by this multi-purpose machining centre which allows both pattern making and trimming

of deck hulls, fiberglass parts and high-resistance composites.

AXIS

X: from 4m to 60m at 80m/min

Y: from 4.2m to 8.8m at 80m/min

Z: from 2m to 6.8m at 30m/min

SPINDLE: 15 or 22kW up to 36,000 rpm

VEGA are high-speed 5 axes machining centers featuring a motorized suspended bridge structure sliding on the two extremities.

They are made of very thick, welded heat treated steel. In order to provide a solution with a dynamically rigid structure,

the design of VEGA series has been optimized to offer a unique combination of performance, short machining times, flexibility,

high quality finish and long-term rigidity.

The linear axis movement is managed by powerful rack and pinion drives with two electronically preloaded servo motors on each side.

Electronic backlash recovery is obtained thanks to the digital servo-drive that generates a mechanical preload between the two pinions (mechanical coupling).

Delivery, commissioning, training and ongoing support Australia wide.

Please call for additional information.

Read less...

To contact CNC Machinery Sales Australia about Belotti Belotti NAVY & VEGA 5 Axis Gantry CNC Machining Centres use Get a quote.