Lovato - Automatic Transfer Switch | ATL800 Get latest price

Automatic Transfer Switch | ATL800

27 Recent Views In Stock

It has outputs for the “automatic” and/or “manual” control of contactors or motorised circuit breakers and switches. It can also manage a third control device as tie breaker or non-priority load management. the layout and system status are displayed directly on the graphic LCD.

Operational Characteristics:

• Auxiliary supply
  • auxiliary supply voltage: 110…240VAC, 12/24/48VDC.
• Voltage measurement inputs
  • rated voltage Ue: 100…600VAC (L-L).
  • frequency range: 45…65Hz.
• Programmable digital inputs
  • negative inputs.
• Programmable relay outputs
  • 2 each with 1 normally open contact (NO – SPST) rated 12A 250VAC.
  • 2 each with 1 normally open contact (NO/NC – SPST) rated 8A 250VAC.
  • 3 each with 1 changeover contact (NO/NC-SPDT) 8A 250VAC.
• Enclosure
  • flush-mount housing: 180x240mm.

General Characteristics:

• AC and DC supply inputs.
• Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
• 128×80 backlit graphic LCD to display measurements, events and alarms in 8 languages (English, Italian, French, Spanish, German, Portuguese, Polish and Russian).
• Active operating mode indicator LED.
• Viewing of L-L and L-N voltage values of the controlled lines.
• Status viewing of contactors or motorised circuit breakers both via display and LED.
• 6 system layouts available.
• Management of a tie breaker.
• 8 programmable digital inputs.
• 7 programmable relay outputs.
• Configuration programming of lines, type of source (line/generator), control and supervision parameters for emergency demand of generating set.
• Possibility of transferring load with closed transition and spontaneous or controlled genset synchronisation.
• Non-priority load management.
• Built-in programmable PLC logic.
• Built-in RS485 communication.
• Event logging.
• Virtual calendar clock (RTC).
• Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
• Parameter programming via NFC technology and the NFC App.
• Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
• Modbus-RTU, ASCII and TCP communication protocol.

Control Functions of the Lines:

• Phase sequence and phase loss.
• Minimum and maximum voltage.
• Voltage asymmetry.
• Minimum and maximum frequency.

 

Order Code	Description
ATL800	Automatic transfer switch controller with optical port and NFC for controlling 2 lines and 1 tie breaker, 110…240VAC supply and 12/24/48VDC, expandable with EXP… series expansion modules.

 

Read more...

To contact Mechtric about Lovato Automatic Transfer Switch | ATL800 use Get a quote.

It has outputs for the “automatic” and/or “manual” control of contactors or motorised circuit breakers and switches. It can also manage a third control device as tie breaker or non-priority load management. the layout and system status are displayed directly on the graphic LCD.

Operational Characteristics:

• Auxiliary supply
  • auxiliary supply voltage: 110…240VAC, 12/24/48VDC.
• Voltage measurement inputs
  • rated voltage Ue: 100…600VAC (L-L).
  • frequency range: 45…65Hz.
• Programmable digital inputs
  • negative inputs.
• Programmable relay outputs
  • 2 each with 1 normally open contact (NO – SPST) rated 12A 250VAC.
  • 2 each with 1 normally open contact (NO/NC – SPST) rated 8A 250VAC.
  • 3 each with 1 changeover contact (NO/NC-SPDT) 8A 250VAC.
• Enclosure
  • flush-mount housing: 180x240mm.

General Characteristics:

• AC and DC supply inputs.
• Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
• 128×80 backlit graphic LCD to display measurements, events and alarms in 8 languages (English, Italian, French, Spanish, German, Portuguese, Polish and Russian).
• Active operating mode indicator LED.
• Viewing of L-L and L-N voltage values of the controlled lines.
• Status viewing of contactors or motorised circuit breakers both via display and LED.
• 6 system layouts available.
• Management of a tie breaker.
• 8 programmable digital inputs.
• 7 programmable relay outputs.
• Configuration programming of lines, type of source (line/generator), control and supervision parameters for emergency demand of generating set.
• Possibility of transferring load with closed transition and spontaneous or controlled genset synchronisation.
• Non-priority load management.
• Built-in programmable PLC logic.
• Built-in RS485 communication.
• Event logging.
• Virtual calendar clock (RTC).
• Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
• Parameter programming via NFC technology and the NFC App.
• Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
• Modbus-RTU, ASCII and TCP communication protocol.

Control Functions of the Lines:

• Phase sequence and phase loss.
• Minimum and maximum voltage.
• Voltage asymmetry.
• Minimum and maximum frequency.

 

Order Code	Description
ATL800	Automatic transfer switch controller with optical port and NFC for controlling 2 lines and 1 tie breaker, 110…240VAC supply and 12/24/48VDC, expandable with EXP… series expansion modules.

 

Read less...

To contact Mechtric about Lovato Automatic Transfer Switch | ATL800 use Get a quote.