Ama-Drainer 80 / 100 | Submersible Motor ...

Ama-Drainer 80 / 100 | Submersible Motor Pump

Supplier: KSB Australia

Vertical single-stage fully floodable submersible motor pump in close-coupled design, IP68, with or without level control, max. immersion depth: 10 m.

17 Recent Views In Stock

Application

Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Main applications

Building services
Drainage
Flood control
Groundwaterlevel (mining/buildings)
Pressure Drainage
Sea -& Riverwater Extraction
Systems
Waste water
Waste water / sewage
Waste water lifting units
Water
Water Extraction
Watertransport

Overview of technical data

Q (50Hz)	0.0 – 130.0 (m³/h)
H (50Hz)	4.5 – 26.0 (m)
Type of bearing	Ball bearings
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	400 V, 3~
Explosion protection	OHNE
No. of impeller entries	Single entry
Impeller material (EN standard)	JL1040
Type of coupling	Direct
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	50.0 (°C)
Pump set location	Wet well
Shaft material (EN standard)	1.4021
Suction characteristics	Self-priming
Type of impeller	Free flow impeller, Open
Type of connection	Thread
UNSPSC classification	4015150300
Casing material (EN standard)	JL1040
eClass assignment	36410101, 36410100, 36410000
Free passage	12.0 (mm)
Installation position	Vertical
Shaft seal type	Mechanical seal
Main applications	Waste water / sewage, Building services, Water
Casing material	Cast iron
Maximum drive rating	7.5 (kW)
Type of installation	Transportable, Stationary
Maximum speed of rotation	2800.0 (1/min)

Application

Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Main applications

Building services
Drainage
Flood control
Groundwaterlevel (mining/buildings)
Pressure Drainage
Sea -& Riverwater Extraction
Systems
Waste water
Waste water / sewage
Waste water lifting units
Water
Water Extraction
Watertransport

Overview of technical data

Q (50Hz)	0.0 – 130.0 (m³/h)
H (50Hz)	4.5 – 26.0 (m)
Type of bearing	Ball bearings
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	400 V, 3~
Explosion protection	OHNE
No. of impeller entries	Single entry
Impeller material (EN standard)	JL1040
Type of coupling	Direct
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	50.0 (°C)
Pump set location	Wet well
Shaft material (EN standard)	1.4021
Suction characteristics	Self-priming
Type of impeller	Free flow impeller, Open
Type of connection	Thread
UNSPSC classification	4015150300
Casing material (EN standard)	JL1040
eClass assignment	36410101, 36410100, 36410000
Free passage	12.0 (mm)
Installation position	Vertical
Shaft seal type	Mechanical seal
Main applications	Waste water / sewage, Building services, Water
Casing material	Cast iron
Maximum drive rating	7.5 (kW)
Type of installation	Transportable, Stationary
Maximum speed of rotation	2800.0 (1/min)